Search found 85 matches

by scttydb411
Thu Nov 08, 2007 9:37 pm
Forum: s300 / SManager
Topic: Any Tuners In North Florida?
Replies: 4
Views: 3136

i frequently travel to gainesville, fl if you're anywere near there. there are some dyno's to use in the area. if you haven't gotten any help, feel free to give me a call.
by scttydb411
Thu Nov 08, 2007 9:27 pm
Forum: s300 / SManager
Topic: Spark plugs
Replies: 81
Views: 108913

i find that if i have a car that seems to have bad ignition/fire issues 9 times out of 10 it's becasue they are not ngk plugs, not stock honda wires or ngk wires, not stock cap/rotor. if using msd ignition then ngk plugs not being used or msd bad. replacing any or most of these to ngk/stock/new msd ...
by scttydb411
Mon Jul 23, 2007 8:31 pm
Forum: Non-Hondata
Topic: bad jumper haarness
Replies: 2
Views: 2810

what brand harness? what is your issue? i've seen 2 brands (they look identical) that have more problems than not. i always recommend boomslang. i have never had a car come through my dyno that has a problem w/ a boomslang. the other 2 unmentioned brands have a very high failure rate and i recommend...
by scttydb411
Wed Jul 11, 2007 8:33 pm
Forum: Applications
Topic: i know this may sound dumb i have to ask
Replies: 7
Views: 4708

get a boomslang obd0-1 conversion harness, p28 ecu, and obd1 dizzy, and s200 or s300.
by scttydb411
Sat Jun 02, 2007 10:28 pm
Forum: K-Pro / KManager
Topic: daughterboard com error
Replies: 21
Views: 12307

daughterboard com error

tuned a cust k24 ek that kept having connectivity issue w/ the usb and had a serial comm cel. few weeks pass and cust begins to get cel and rough idle, driveability, etc. he connects to the laptop and is now getting daughterboard error cel. anything to do, or just send the ecu in to be checked. it i...
by scttydb411
Sat Apr 28, 2007 12:47 pm
Forum: s100/s200
Topic: purchasing extra plugs/wires for launch
Replies: 1
Views: 2153

purchasing extra plugs/wires for launch

i have a customer that needs wire/plug for launch to go into s200 box.

how much and does my normal dealer discount apply?

thanks in advance.
by scttydb411
Tue Apr 24, 2007 9:45 pm
Forum: s300 / SManager
Topic: do all ECUs support A/C?
Replies: 8
Views: 3811

i'm assuming it's an obd2 stock ecu and an obd1 w/ conversion harness as the hondata ecu...right?

check your conversion harness and you'll probably find b5 (ac switch) mis-pinned to b7. i've seen this on more than one occassion. if b5 is good then check a15 (ac clutch).
by scttydb411
Fri Apr 06, 2007 10:28 pm
Forum: s100/s200
Topic: EGR Valve
Replies: 8
Views: 4959

if it's an actual hondata prepped ecu then it's more than likely ok. i would check the eeprom to see if it can be pulled out easily and if it comes out w/o a lot of effort then stack another dip socket into the dip that's already there and then install a zif socket and your chip or just press the ch...
by scttydb411
Thu Apr 05, 2007 8:07 pm
Forum: s100/s200
Topic: EGR Valve
Replies: 8
Views: 4959

if it's a loose chip or soldering job then i would think the shop should take care of it and it'll be quick, easy, and cheap.

if something is going bad in your ecu or an electrical problem with your car than probably not their responsibility.
by scttydb411
Thu Apr 05, 2007 8:05 pm
Forum: s100/s200
Topic: 87 Octane gas and NO PING?
Replies: 1
Views: 1971

it's possible, but it depends on your setup. timing is advanced until it starts detonating or power stops increasing (buffer zone). if detonation is present then a few degrees are pulled back out for safety. it's possible that you have a buffer zone and are lucky.
by scttydb411
Thu Apr 05, 2007 2:26 pm
Forum: s300 / SManager
Topic: i keep on throwing map code after i boost ????@??
Replies: 8
Views: 3286

Do you have closed loop setup? I read somewhere a long time ago, that during a prolonged decel the ecu will switch from open to closed loop, if closed loop is not disabled ( or setup ) this will throw a CEL. This was back in my Uberdata days so i dont know if there is any relevance. I cant remember...
by scttydb411
Wed Apr 04, 2007 9:13 pm
Forum: s300 / SManager
Topic: i keep on throwing map code after i boost ????@??
Replies: 8
Views: 3286

try another known good 3 bar mapsensor. i've seen a run of a few going bad. tune a car and it runs great for a week or two. car starts idling poorly and reading erroroneously. swap a new sensor in and no problems anymore. you might also want to put an inline filter (like the type supplied w/ electro...
by scttydb411
Wed Apr 04, 2007 8:58 pm
Forum: s100/s200
Topic: EGR Valve
Replies: 8
Views: 4959

keep a paperclip with you and the next time a cel comes on jump the svc connector w/o turning it off or stall it out w/o turning the key to off so you can jump the connector and read the codes. it could be something as simple as a loose connecting chip (just encountered that one) where the dip socke...
by scttydb411
Sat Mar 31, 2007 4:30 pm
Forum: K-Pro / KManager
Topic: randomly losing spark?
Replies: 5
Views: 2943

anyone else?
by scttydb411
Tue Mar 27, 2007 6:51 pm
Forum: s300 / SManager
Topic: p06 ecu no vtec output
Replies: 8
Views: 3702

seems like it's just easier to convert the p06 to p28 and be done w/ it.