Search found 78 matches

by Slip_Angle
Thu May 10, 2012 8:02 pm
Forum: K-Pro / KManager
Topic: A/F Active on in-gear deceleration
Replies: 3
Views: 1374

A/F Active on in-gear deceleration

Noticed today on my Tunerview II that when decelerating (in gear) my A/F was jumping around. The injectors should be off with A/F stuck at 32.x from what I understand. This evening I took the car out to datalog and checkout the problem. Normally A/F would show 32.x as the injectors are off and most ...
by Slip_Angle
Sat Jan 28, 2012 10:29 pm
Forum: K-Pro Calibrations
Topic: Flashpro Cals in Kpro
Replies: 0
Views: 1174

Flashpro Cals in Kpro

There are some flashpro calibrations for the 07 TSX that I would be very happy to get in Kpro. Kpro only has the 1st gen TSX cals included. Is there a way to have them included in Kpro or atleast a way to view/copy past the tables?

Assistance greatly appreciated!
by Slip_Angle
Tue Jul 05, 2011 3:41 pm
Forum: K-Pro / KManager
Topic: Car running lean after 1.5.1 update
Replies: 7
Views: 1684

Re: Car running lean after 1.5.1 update

Interesting. I upgraded from 1.4 to 1.5.1 and my fuel tables / LTFT are all out by about 6%-8% on the low cam.

Any more information on this?
by Slip_Angle
Thu Jun 16, 2011 8:37 pm
Forum: K-Pro / KManager
Topic: KManager 1.5.1 - Still work with Tunerview II?
Replies: 1
Views: 907

KManager 1.5.1 - Still work with Tunerview II?

I heard the communication preamble/authentication was changed in the newer versions of Kmanager. I would like to upgrade to the newer version but want to make sure my TunerView II will continue to function.

Hondata: Please advise.

Thanks.
by Slip_Angle
Fri Dec 10, 2010 2:16 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

mkulak wrote:Have you checked your CAMs to make sure you are not off a tooth or 2 on either the cams or crank?? I've seen that affect the amount of timing you can run.
Ah, interesting. Thanks for the information, I'll check this.
by Slip_Angle
Fri Dec 10, 2010 9:08 am
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Look at your ignition compensation values and you will see that you are retarding alot of timing when it is cold. Sorry, maybe I'm not being clear in my post. I understand temperature compensation retards ignition and that's all good. Here's what I'm trying to understand. Cole's Notes * I tuned my ...
by Slip_Angle
Thu Dec 09, 2010 4:18 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Spunkster wrote:The IAT being so low is causing you to have ignition compensation.
I'm talking about table ignition values. I tuned in Summer and they needed to be low to avoid knock.
by Slip_Angle
Wed Dec 08, 2010 8:38 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Spunkster wrote:Why is your IAT only 26 degrees after 20 minutes of driving?
I have a CAI and live in Canada. It gets pretty cold here!
by Slip_Angle
Wed Dec 08, 2010 10:42 am
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

You have over a 20 minute datalog. You need to give specific times this is happening or note them in the datalog. There are no specific times because it's always the case. As I mentioned, this is more of a theory question as to why my ignition values would be so low "in general" compared to other s...
by Slip_Angle
Tue Dec 07, 2010 5:59 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Spunkster: I provided all of the information you asked for -- can you provide some feedback please?
by Slip_Angle
Wed Dec 01, 2010 8:22 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Still looking for some assistance.
by Slip_Angle
Fri Nov 26, 2010 3:53 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Information above.

Any comments?
by Slip_Angle
Wed Nov 24, 2010 4:44 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

Detail

http://www.hondata.com/forum/viewtopic.php?t=10108 Just a theory question but good point, you may pick out something I don't see. BTW: I put this in the wrong forum, I have Kpro. Serial number 2547 (Hardware version 1.0, Firmware version 1.0) Krpo 1.4.0.0 2002 Civic SiR Stock ECU 2.5 inch exhaust (...
by Slip_Angle
Wed Nov 10, 2010 3:32 pm
Forum: K-Pro / KManager
Topic: WOT Ignition Values
Replies: 15
Views: 3294

WOT Ignition Values

Looking for feedback as to what would explain why my ignition values are lower than expected. In columns 8-10 on the high cam ~4300-4700 my ignition values are 18* rising to ~24*/25* at max rpm. Anymore and I start to see some knock. These values are lower than the base calibrations and other tuned ...
by Slip_Angle
Wed Jun 23, 2010 8:51 pm
Forum: K-Pro Calibrations
Topic: Stock 06' K24a2 in a 02 RSX - What Calibration File?
Replies: 5
Views: 2838

There are 3 TSX calibrations for N/A engines but they are all 04-05. Hondata really should provide a stock 06 TSX calibration because the intake cam is so much better and requires much different cam angles. I would think Hondata already has this calibration as they must be providing something with t...