Search found 78 matches

by Slip_Angle
Sat Apr 25, 2009 8:46 pm
Forum: K-Pro / KManager
Topic: PNF + Tunerview II Problem
Replies: 6
Views: 2242

PNF + Tunerview II Problem

I have a Tunerview II display that I've plugged into KPro and everything works great with the exception if two peak values. Those are A/F and Duty cycle. (The real-time values of these work fine) No matter how little throttle I've applied the A/F Peak is always 2531 and the duty cycle 100%. (Kpro ha...
by Slip_Angle
Fri Mar 27, 2009 7:43 pm
Forum: K-Pro Calibrations
Topic: The "new" k24a2 calibration!
Replies: 11
Views: 6122

Slip angle.. The part throttle is a bit rich, sorry about that, I recommend removing a bit of fuel in those areas.. The old stock TSX map was pretty worthless, even in a non-drive by wire car, and should probably be removed.. :) I'm pretty happy with the part throttle. The tune is so smooth and the...
by Slip_Angle
Tue Mar 17, 2009 8:56 pm
Forum: K-Pro Calibrations
Topic: The "new" k24a2 calibration!
Replies: 11
Views: 6122

Kudos for producing the new tsx-04-05 stock calibration for us K24a2 owners, it's great! Hondata - Two quick questions. 1. Open loop seems very rich, is this to accommodate the reflash owners and adding modifications without running lean? (My understanding is this calibration is the same or similar ...
by Slip_Angle
Sun Feb 15, 2009 10:06 am
Forum: K-Pro Calibrations
Topic: The "new" k24a2 calibration!
Replies: 11
Views: 6122

I spotted these tunes when version 1.3.4.0 came out and asked about them as well. I can't wait to try them once spring arrives here. I'm really happy to hear they are so good compared to the original.

Plaino, what do you find is so good about them besides power delivery?
by Slip_Angle
Wed Dec 17, 2008 5:24 pm
Forum: K-Pro / KManager
Topic: Kmanager 1.3.4.0 - New Calibrations
Replies: 4
Views: 1678

Good stuff, thanks for the reply. I will give this calibration a try.
by Slip_Angle
Tue Dec 16, 2008 6:13 pm
Forum: K-Pro / KManager
Topic: Kmanager 1.3.4.0 - New Calibrations
Replies: 4
Views: 1678

The tsx-04-05 calibration is for the dual adapter harness. The k24-tsx-stock calibration is actually a very early version of a similar dual adapter type setup, which never made it to production. Is this calibration fine to use for us regular Kpro users (no dual adapter)? Is it "better" or more fine...
by Slip_Angle
Tue Dec 16, 2008 2:06 pm
Forum: K-Pro / KManager
Topic: Kmanager 1.3.4.0 - New Calibrations
Replies: 4
Views: 1678

Kmanager 1.3.4.0 - New Calibrations

What are the differences between the original k24-tsx-stock and the newly added tsx-04-05-stock? I noticed there is a big difference in the temperature compensation settings and the new tsx-04-05-stock has it off for low-medium load. Why is that? The original k24-tsx-stock also has a hard set vtec o...
by Slip_Angle
Sun Apr 20, 2008 9:42 pm
Forum: K-Pro / KManager
Topic: PLX iMFD Gauges - Do they work with Kpro?
Replies: 2
Views: 1756

PLX iMFD Gauges - Do they work with Kpro?

Can these configurable gauges be connected to kpro some way?

If not, is there a common/elegant solution that is used such as a carputer or something to have kpro active all the time instead of hauling a laptop in the car?

Thanks.
by Slip_Angle
Tue Nov 06, 2007 7:50 pm
Forum: K-Pro / KManager
Topic: Big Kpro problem
Replies: 9
Views: 5030

My 02 Civic SiR with K24a2 swap is seeing this problem now too. This morning I started the car and got the P0181 code on my Brockway R920. I cleared the code three times without shutting of the car and it would always come back immediately. I then cleared the code and shut the car off. The code has ...
by Slip_Angle
Tue Oct 09, 2007 2:18 pm
Forum: K-Pro / KManager
Topic: k24a2 Kpro Calibration
Replies: 7
Views: 4826

I understand but I only have Intake, Shorty Header and Exhaust and it seems that closed loop and idle shouldn't be correcting 10-20%.... I would assume the reflash would take those mods into account. Interestingly, I did a cut and past of the fuel maps from the k20a2 310cc TODA calibration and it's ...
by Slip_Angle
Mon Oct 08, 2007 9:22 pm
Forum: K-Pro / KManager
Topic: MOTEC SDL Dash
Replies: 1
Views: 1529

MOTEC SDL Dash

Is there any possibility of integrating a Motec LCD display with Kpro and having datalogging? The Motec's can do it but I'm not sure if there is any integration between the two products? Are there any other options? I'm currently using my laptop but it would be nice to have an in-dash PC that I coul...
by Slip_Angle
Wed Oct 03, 2007 8:04 pm
Forum: K-Pro / KManager
Topic: k24a2 Kpro Calibration
Replies: 7
Views: 4826

Will Hondata be releasing a revised, more tuned version of the k24a2 calibration? The closed loop STFT is all over the place. If this is similar to the re-flash is it also this far out in closed loop?
by Slip_Angle
Thu Jul 05, 2007 7:39 pm
Forum: K-Pro / KManager
Topic: k24a2 Kpro Calibration
Replies: 7
Views: 4826

Interesting.

Thanks for the information!
by Slip_Angle
Tue Jul 03, 2007 6:37 pm
Forum: K-Pro / KManager
Topic: k24a2 Kpro Calibration
Replies: 7
Views: 4826

A couple questions then.

1. Why does the cam angle reach 30 degrees in parts of the calibration? I though the K24A2 was limited to 25?
2. Part throttle cam seems to be on the low side. Would this engine benefit from higher cam angles in part throttle?

Thanks!
by Slip_Angle
Sat Jun 30, 2007 11:10 pm
Forum: K-Pro / KManager
Topic: k24a2 Kpro Calibration
Replies: 7
Views: 4826

k24a2 Kpro Calibration

Is the calibration that comes with KPRO the same as the reflash or closer to stock? If it's closer to stock, can you provide one similar to the reflash?

I just finished a K24a2 swap into my 02 Civic Si.

Thanks.