Hondata

Spanky wrote:try 669 scalar and -334 offset.

How the hell did you come up with that?

What version of the software and can you post a log and the calibration.


Just saving Matt the response...lol

back on topic. is the b16 greddy basemap provided already have FI tables created? just a quick question because i don't want to be creating new tables on top of the old if there is already a map. going a little tangent on the top but when creating boost tables, if you keep selecting the option and ...

This is what is wrong with it.

http://www.hondata.net/forum/viewtopic.php?t=4098

You actually dont need one with the S300. You can set the parameters up in in the calibration.

Set the fuel pressure to stock and start tuning. There is no need turn it up to get the car to start with the features of the S300.

Open up SManager. Click on Help, then click on Contents. Read and repeat.

Yep, i have ran 1600cc injectors on Hondata and no problems. Wouldnt know they are any bigger than a 310-550 either.

Use a stock Calibration, then tune it.

That usually works the best.

Is there a way for us to get the beta back that fixed the idle issues, and the tracing ONLY? I do not care about the additional temp correction stuff. This is the last BETA that worked for us.

Thanks.

I had the similar result happen on the dyno last night. Newer version of the software, old map... car freaked out and the main relay clicked, etc. The S300 wouldnt take the upload. Tried several times and even tried closing everything and loading it up again, didnt work. Used V1.0.9 on another tuner...

Thanks a lot. I will test this evening and update the status.

Sorry, posted the wrong one....

Try this and let me know if you need any other info..


Thanks,
Ricky

Here is mine...

Remove .skl

Sorry, forgot the important details: 1. FJO wideband (NTK Sensor) 2. Wired through the O2 input Readings will display in the "display", but will not log realtime into the lambda trace. I made a recording briefly, I will post it and you can see during the playback the lambda values are in t...