Search found 408 matches

by AREA876
Thu Nov 08, 2018 11:58 am
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

It my first time using kpro, can someone tell me if the analog and A/F reading should read the same if using a analog input for the external wideband
by AREA876
Thu Nov 08, 2018 10:53 am
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I meant data
by AREA876
Wed Nov 07, 2018 9:29 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

The offset was left at 0 with the LC2 conversion, I'm thinking maybe there is something wrong with the LC1 conversion date
by AREA876
Wed Nov 07, 2018 7:17 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

If you look closely at the photo you will see the analog and the Innovate display (0.97) match but the A/F sensor (0.29) reading is off. The close loop operation seems to also work well, it's just that the analog and the A/F sensor reading don't match
by AREA876
Wed Nov 07, 2018 4:47 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I gave up trying to use the LC1 conversion and used the LC2 one instead, seems to work fine but I still have a issue, I thought both the analog and A/F would read the same.
Analog vs AF reading.png
Analog vs AF reading.png (206.45 KiB) Viewed 1736 times
by AREA876
Wed Nov 07, 2018 11:06 am
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

The ground is the same as the ECU on the valve cover stud and the 12v is supplied by a relay which is connected to the battery
by AREA876
Tue Nov 06, 2018 3:49 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

Why is it not possible to use a custom conversion for external wideband input?
by AREA876
Tue Nov 06, 2018 3:39 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I'm also noticing the analog input and the A/F are not matching, any idea why?
by AREA876
Tue Nov 06, 2018 3:36 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

Custom conversion at constant 4.98v reads better in the analog input
Custom Conversion at 4.98v.png
Custom Conversion at 4.98v.png (102.04 KiB) Viewed 1642 times
by AREA876
Tue Nov 06, 2018 3:33 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

Custom conversion at constant 0.05v reads better in the analog input
Custom Conversion at 0.05v.png
Custom Conversion at 0.05v.png (101.54 KiB) Viewed 1642 times
by AREA876
Tue Nov 06, 2018 3:15 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

With a constant 4.98 volt for the LC1 wideband this what kpro reads with the LC1 conversion
Constant input voltage of 4.98v.png
Constant input voltage of 4.98v.png (103.62 KiB) Viewed 1642 times
by AREA876
Tue Nov 06, 2018 3:09 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

With a constant 0.05 volt for the LC1 wideband this what kpro reads with the LC1 conversion
by AREA876
Tue Nov 06, 2018 2:05 pm
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I tested the Innovate wideband using the LM program and output 0v and then checked the voltage at the ECU end with a multimeter and it read 0.05v, did the same for 5v which read 4.98v.So my thinking voltage offset isn't so much the problem
by AREA876
Tue Nov 06, 2018 11:05 am
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I'm curious to know what values do hondata use for the Innovate LC1 wideband as when I input the values provided by Innovate (0v=7.35 and 5v=22.39) the readings match perfectly
by AREA876
Tue Nov 06, 2018 4:05 am
Forum: K-Pro / KManager
Topic: Innovate LC1 wideband setup
Replies: 42
Views: 4763

Re: Innovate LC1 wideband setup

I realize Kpro doesn't recognize custom analog input as it external wideband, only the brands that are listed as conversions in analog inputs.
Can anyone advise me the way forward.