Search found 128 matches

by carbonctr
Fri Feb 29, 2008 2:29 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

cranny wrote:sweet there ya have it. very much needed.
How does that work? Will KManager show me a voltage value or the correct AF value? How do I connect the wideband into the ELD input. Next question.... I've heard that the wideband will cost over ?200 / $400! Is it that "worth it"?!
by carbonctr
Wed Feb 27, 2008 2:04 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

cranny wrote:sounds very possible. you need a wideband dude , invest in one asap.
I don't think the UK PRA ECU will accept a wideband.
by carbonctr
Tue Feb 26, 2008 10:36 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

It is real knock - knock around peak torque usually is. The exact timing you need varies with fuel, temperature, boost, exhaust etc, but I would not expect to see over 20 degrees timing in columns 11 and above. Also the ignition drops off sharply above 7500 rpm, whereas it should be almost flat dow...
by carbonctr
Tue Feb 26, 2008 3:11 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

Hondata / Spunkster

Any chance you could have a wee look at my calibration and datalog?

Pretty please with cherries on top....
by carbonctr
Tue Feb 26, 2008 2:57 am
Forum: K-Pro / KManager
Topic: Temperature Compensation with Supercharger
Replies: 14
Views: 6465

This sounds interesting! Let me know how you get on!
by carbonctr
Mon Feb 25, 2008 7:23 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

It seemed to knock a bit less after reducing the suspect ignition area (6250 rpm upwards col 11-13) by 2 deg, but I didn't get a chance to datalog. Will datalog soon and see how the knock count differs. I don't know if 2 deg reduction would really make a noticable difference but it did seem a bit sl...
by carbonctr
Sun Feb 24, 2008 2:37 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

your datalog is showing your knocking a ton after about 6250 rpm. but its funny , i load your datalog and your A/F ratio stays 14.7 the whole time on my graph , wierd. whats your air fuel ratio at average during a pull? you seem to be running conservative enough of timing. maybe your knock lies in ...
by carbonctr
Thu Feb 21, 2008 2:18 am
Forum: K-Pro / KManager
Topic: How bad is knock?
Replies: 25
Views: 10341

How bad is knock?

I got a 2004 uk civic type-r with jackson supercharger, carbon induction kit, dc sports exhaust, stock header and lots of nice suspension mods :D To my delight it has a K-Pro fitted so after downloading your software did a datalog and noticed that the car knocks quite a bit at high revs. I don't kno...