Search found 22600 matches

by Spunkster
Mon Mar 18, 2024 11:27 am
Forum: s300 / SManager
Topic: Upload botton grayed out can't upload
Replies: 1
Views: 119

Re: Upload botton grayed out can't upload

There appears to be a jumper on J12 and it must be removed.
by Spunkster
Fri Mar 15, 2024 4:14 pm
Forum: FlashPro Manager
Topic: Switching from ktuner
Replies: 3
Views: 8012

Re: Switching from ktuner

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Post the FlashPro serial number here.
by Spunkster
Thu Mar 14, 2024 12:23 pm
Forum: FlashPro Calibrations
Topic: K24A swap ignition question
Replies: 1
Views: 119

Re: K24A swap ignition question

It should not matter which ones are used.
by Spunkster
Thu Mar 14, 2024 9:42 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: ECU "FORGETTING" FLASH
Replies: 3
Views: 246

Re: ECU "FORGETTING" FLASH

answered via email
by Spunkster
Thu Mar 14, 2024 8:59 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: ECU "FORGETTING" FLASH
Replies: 3
Views: 246

Re: ECU "FORGETTING" FLASH

When it does this have you tried datalogging to see what errors are reported?
by Spunkster
Thu Mar 14, 2024 8:57 am
Forum: K-Pro / KManager
Topic: Kpro v4 Not Firing Injectors
Replies: 2
Views: 490

Re: Kpro v4 Not Firing Injectors

Have you tried your ECU on a different vehicle to see if it starts and runs that ok?
by Spunkster
Wed Mar 13, 2024 9:05 am
Forum: K-Pro / KManager
Topic: NC/NS
Replies: 1
Views: 82

Re: NC/NS

You need to try the ECU in a known working vehicle and see if it works. If it doesn't then something in your vehicle has damaged the ECU. If it does work, then there is most likely a wiring problem in your vehicle.
by Spunkster
Tue Mar 12, 2024 2:33 pm
Forum: K-Pro Calibrations
Topic: 06 Rsx-s help
Replies: 3
Views: 205

Re: 06 Rsx-s help

You can try contacting the original owner, but there is no other way to get the file you overwrote.
by Spunkster
Tue Mar 12, 2024 9:03 am
Forum: s300 / SManager
Topic: Wideband Questions
Replies: 8
Views: 373

Re: Wideband Questions

For power I would recommend that you use a switched power source in the fuse box under the dash as there are empty slots you can connnect a spade connector to that are switched with the ignition.

Try it without the analog signal ground and see if it reads correctly.
by Spunkster
Tue Mar 12, 2024 8:58 am
Forum: K-Pro / KManager
Topic: VSS in an AUTO rsx ecu.
Replies: 13
Views: 430

Re: VSS in an AUTO rsx ecu.

You do not have the alternate input set in the calibration as you need to when using an Auto ECU.

Make sure you follow the instructions at: https://hondata.com/tech-alternative-ecu-engine-swap
by Spunkster
Tue Mar 12, 2024 8:55 am
Forum: K-Pro / KManager
Topic: RSX Speedometer Problems
Replies: 12
Views: 2892

Re: RSX Speedometer Problems

Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

Include a link to this thread.
by Spunkster
Mon Mar 11, 2024 2:27 pm
Forum: K-Pro / KManager
Topic: speedometer reads, but no vss on kpro (PRB)
Replies: 7
Views: 947

Re: speedometer reads, but no vss on kpro (PRB)

We test on a bench, but not everything is tested as we are making sure that the K-Pro uploads and datalogs properly. It was also installed over a year and a half ago.
by Spunkster
Mon Mar 11, 2024 12:02 pm
Forum: s300 / SManager
Topic: Wideband Questions
Replies: 8
Views: 373

Re: Wideband Questions

For the wideband to read correctly and be able to be used for closed loop you must use the D10 input as the D14 input cannot see the full voltage range. Details can be found in the help file at: https://hondata.com/help/smanager/widebandlambdaparameters.htm?zoom_highlightsub=wideband The other senso...
by Spunkster
Mon Mar 11, 2024 11:28 am
Forum: K-Pro / KManager
Topic: speedometer reads, but no vss on kpro (PRB)
Replies: 7
Views: 947

Re: speedometer reads, but no vss on kpro (PRB)

Try your ECU on a known working vehicle and see if it reads the VSS.
by Spunkster
Mon Mar 11, 2024 11:26 am
Forum: S300 Calibrations
Topic: high comrpession f23 base map?setup help
Replies: 2
Views: 305

Re: high comrpession f23 base map?setup help

Don't use D14 as it cannot see the full voltage range.