Search found 100 matches
- Fri Oct 28, 2016 8:18 pm
- Forum: S300 Calibrations
- Topic: Basemap B18c1 Gt28rs
- Replies: 1
- Views: 2862
Re: Basemap B18c1 Gt28rs
There you go bro. Im not sure what your wastegate pressure is at so i set it at 9.9psi if you are higher you can raise it under "Boost cut" parameters. This is a basemap so i would advise to have a wideband. Let me know how it do for you, i will try to help if there is any problem.
- Fri Oct 28, 2016 8:02 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3305
Re: B16A2 semi allmotor build map needed
Do you have a wideband?
Check your distributor timing.
Check your distributor timing.
- Tue Oct 25, 2016 2:28 pm
- Forum: S300 Calibrations
- Topic: Built B20v with 440cc Injectors Basemap needed!
- Replies: 9
- Views: 2958
Re: Built B20v with 440cc Injectors Basemap needed!
Check your timing with, timing gun. Since you dont have wideband cant narrow down to the problem.
- Tue Oct 25, 2016 12:44 pm
- Forum: S300 Calibrations
- Topic: Built B20v with 440cc Injectors Basemap needed!
- Replies: 9
- Views: 2958
Re: Built B20v with 440cc Injectors Basemap needed!
Would it idle and die or wont crank up?
- Mon Oct 24, 2016 9:15 pm
- Forum: S300 Calibrations
- Topic: Built B20v with 440cc Injectors Basemap needed!
- Replies: 9
- Views: 2958
Re: Built B20v with 440cc Injectors Basemap needed!
You would want to get a widebamd before driving the car. Overall did the basemap able to start the car and idle fine?
- Mon Oct 24, 2016 10:41 am
- Forum: S300 Calibrations
- Topic: Built B20v with 440cc Injectors Basemap needed!
- Replies: 9
- Views: 2958
Re: Built B20v with 440cc Injectors Basemap needed!
You do have wideband right? Make sure afr are good
- Sun Oct 23, 2016 7:08 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3305
Re: B16A2 semi allmotor build map needed
Adjust AFR to spec. Let me know how it does this is a descent basemap to get you up and running. Let me know how it do!
- Sun Oct 23, 2016 7:00 pm
- Forum: S300 Calibrations
- Topic: Need basemap for built gsr b18c n/a
- Replies: 2
- Views: 7277
Re: Need basemap for built gsr b18c n/a
Hey load this map up see how it do. Adjust Afr to spec timing map is retard a tad bit to compensate for your higher compression since im assuming you are running 91 octane. Let me know how it do and if you need anymore help.
- Sun Oct 23, 2016 6:52 pm
- Forum: S300 Calibrations
- Topic: Built B20v with 440cc Injectors Basemap needed!
- Replies: 9
- Views: 2958
Re: Built B20v with 440cc Injectors Basemap needed!
This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.
- Sun Oct 23, 2016 6:39 pm
- Forum: S300 Calibrations
- Topic: need b17a1 turbo basemap help
- Replies: 4
- Views: 1971
Re: need b17a1 turbo basemap help
Thats awesome! Let me know how the dyno tune go and how much it made!
- Sun Sep 18, 2016 7:19 pm
- Forum: K-Pro Calibrations
- Topic: K24A2 TSX CAM ANGLE MAX ADVANCE??????????????
- Replies: 2
- Views: 3531
Re: K24A2 TSX CAM ANGLE MAX ADVANCE??????????????
Well im sure with the current cam angle degrees you should be fine, since you are turbo. You would want less cam angle since you will have a lot of back pressure with high cam angle + the turbo. Supercharge will be vice versa since you would want a higher cam angle degree on a Supercharge application.
- Sun Sep 18, 2016 7:09 pm
- Forum: S300 Calibrations
- Topic: Honda h22a7
- Replies: 2
- Views: 2263
Re: Honda h22a7
Let me know what transmission you're using so i can dial it in. This should be okay as a basemap. Let me know how it do.
- Sun Sep 18, 2016 7:00 pm
- Forum: S300 Calibrations
- Topic: b18c1 S2 pro IM 70mm TB S2 tuner 2 cams base map help
- Replies: 6
- Views: 3063
Re: b18c1 S2 pro IM 70mm TB S2 tuner 2 cams base map help
This should be a good start up. Let me know how it do for you, if any problem let me know i will try to help you out.
- Tue Sep 06, 2016 5:26 pm
- Forum: S300 Calibrations
- Topic: Could someone help?
- Replies: 5
- Views: 2588
Re: Could someone help?
Should be startup. Adjust AFR to spec. Let me know how it do, i will try to help as much as i can.
*Use at your own risk I will not be responsible for any problem or damage to your engine*
*Use at your own risk I will not be responsible for any problem or damage to your engine*
- Tue Sep 06, 2016 5:18 pm
- Forum: S300 Calibrations
- Topic: need b17a1 turbo basemap help
- Replies: 4
- Views: 1971
Re: need b17a1 turbo basemap help
Let me know how it work for you. Also, looking forward how much you make :) safe trip brother