Search found 80 matches

by tboostdsi
Thu Mar 02, 2006 9:15 pm
Forum: s300 / SManager
Topic: oh man, problems galore! Help?
Replies: 19
Views: 9521

so what is your cel light. if you can connect to the ecu you should be able to read what the engine cel code is.
by tboostdsi
Thu Mar 02, 2006 8:27 pm
Forum: s300 / SManager
Topic: oh man, problems galore! Help?
Replies: 19
Views: 9521

man, i'm glad i didnt try to do itmyself cause i'm lacking the 2 year degree in comp science so i would have really f ed it up. its 100 for converting the p28 to be compatible with the s300. that includes shipping. hopefully the ecu is salvageable or its gonna cost mucho mas. hopefully hondata will ...
by tboostdsi
Thu Mar 02, 2006 8:22 pm
Forum: s300 / SManager
Topic: finally got IT tuned!!!
Replies: 10
Views: 6071

finally got IT tuned!!!

b18c5 dart block, type r head w skunk 2 valve train. 9:4:1 compression ration w rc440's jrsc 8lbs. went to TURBO TUNE in greensboro NC. 208 hp and 149 tq at the wheels. runs really good accept they think i have an ignition problem cause on my dyno chart graph, the bar or line goes up and down as it ...
by tboostdsi
Thu Mar 02, 2006 8:14 pm
Forum: s300 / SManager
Topic: oh man, problems galore! Help?
Replies: 19
Views: 9521

send your ecu into hondata and hope nothing is too serious. not to single you out but this is an example for everyone that doesnt know what they are doing to send their ecu's into hondata. i'm sure gad i convinced myself to send it in to hondata cause i almost tried soldiering it myself too. good lu...
by tboostdsi
Thu Feb 23, 2006 1:00 pm
Forum: Non-Hondata
Topic: What shop to tune hondata
Replies: 2
Views: 1971

thanks spunk, i think i am going to go with them. they are the ones that have tried to help me with the basemaps and all. p1 auto has been very short w me and they dont have any basemaps....i think i am going to go with turbo tune! thanks again.
by tboostdsi
Thu Feb 23, 2006 7:29 am
Forum: Non-Hondata
Topic: What shop to tune hondata
Replies: 2
Views: 1971

What shop to tune hondata

hi, i live in NC. The only hondata tuner is turbo tune in greensboro. I made a post on Club SI about this same topic. None of them in the southeast forum have even heard of them. They all tell me to go to P1auto ( p1auto.com ) down in SC. The proplem is that they aren't a hondata dealer and im worri...
by tboostdsi
Tue Feb 21, 2006 7:34 am
Forum: s300 / SManager
Topic: AEM UEGO w/ s300
Replies: 15
Views: 7281

not sure about the uego but im pretty sure they are all the same and that you can hook up the wideband to the o2 signal output instead of splicing into the eld wire.
by tboostdsi
Tue Feb 21, 2006 7:31 am
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 5403

i uploaded the calibration then dataogged and drove around the block a few times. my a/f is good all around until i hit full boost. when full boost hits, my af goes lean to 13's to 14's. how do i save the datalogg so i can post my a/f on here. i'll do that so you can take a look at it.
by tboostdsi
Mon Feb 20, 2006 12:26 pm
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 5403

actually, im a little lean in boost so adding the test pipe wouldnt do me any good until i get it tuned. i plan on getting it to a tune shop down in sc called p1 auto.
by tboostdsi
Mon Feb 20, 2006 10:01 am
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 5403

ok, found my rc injector box, it says SAT 12.5 i believe this means 12.5 ohm saturated injectors. car is running the best its ever ran. i have a b18c5 9:4:1 dart block type r head w skunk2 valve train and type r cams. boost 11lbs w stock cat. going for test pipe should lower my boost levels. i wonde...
by tboostdsi
Mon Feb 20, 2006 9:57 am
Forum: Non-Hondata
Topic: RC 440 injectors
Replies: 4
Views: 3124

ok, i found the original box they came in. it says SAT 12.5. imagine that means saurated 12.5 ohm injectors..? must be 12.5 ohm the part number from RC is SL9-440. thanks for the help.
by tboostdsi
Mon Feb 20, 2006 7:26 am
Forum: s300 / SManager
Topic: Launch Control: Fuel Cut or Ignition cut?
Replies: 10
Views: 17286

not a turbo owner but i have the jrsc 11 lbs and i was curious how to set up my lauch control and after setting it up i dont need a clutch sensor or anything like i did w the s200. and all i have to do is hold the pettal to the floor and it should stay at the rpm desired right? thanks, sorry for the...
by tboostdsi
Mon Feb 20, 2006 7:10 am
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 5403

i loaded the rc 12 ohm b18c5 supercharger and my car runs better. how to i know if they are 12 ohm or not. does it say on the injectore. maybe i'll look on the box they cam with. My injectors came with the hondata reprogrammed ecu and the s200 system. its like 1300 for the kit on jacksonracing.com. ...
by tboostdsi
Sun Feb 19, 2006 8:42 am
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 5403

i have basically the same big boost kit w the rc 440's. but i am running a b18c5 now. are those injectors considered 12 ohm? if so, and i uploaded a different calibration that wasnt for 12 ohm, would this cause my car to not run right?
by tboostdsi
Sun Feb 19, 2006 8:39 am
Forum: Non-Hondata
Topic: RC 440 injectors
Replies: 4
Views: 3124

RC 440 injectors

my question is are the rc 440's considered 12 ohm injectors? i am wondering this so i can download the right calibration. thanks