Hondata

In either case I don't want to discuss theory... just want to get a toggle for the P0128 code, as even customers with the OEM thermo are popping it for some reason, and I can find no fault in their cooling system -- both the stock thermo cars I worked on in person, had on the dyno, and the car ran ...

We do not use turbo mafs on FN2, that is why our options is limited - only race calibration Why can't the FN2 calibrations be used? What do you mean 'turbo mafs'? I use the race calibration because it has boost control in assists. There is no it in AFM calibrations. What do you mean 'turbo mafs'? I...

Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20 We have not changed the race calibration code for the last year or so. You should be aware that this is a 'race' calibration, and the fuel level / economy will not ...

VitViper wrote:We need P0128 disable on the 06-11 Civic Si calibrations -- I have customers throwing that code with low temp thermos (and my car has a low temp as well).

on 8th gen Accords and TSX cars this failur appears once a month

Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20

This datalog more entertaining

Hondata
Is it possible to add function in datalog to close ALL log files

What vehicles / ECUs are involved, and what FlashPros are being used? We've only just started selling the Accord FlashPro, so it seems like you may be using the TSX FlashPro. Is that the case? There are many Accord/TSX 09-10 users in Europe and Russia who use Flashpro. In 2012 this was the only way...

Hondata 3 (three) Hondata ECUs of my clients´ Honda Accord 2010 have erro coded P0128. This error is fixed for Civic K24 2012. Is it possible to fix it for other Hondas too? Ilx 2013 Tsx 2009-2010 International Accord 2008-2010 Add: When we activate secondary water sensor the error p0128 does not a...

Zoro2006: This is to prevent manual transmission calibrations from being loaded into automatic transmission ECUs. BWelbourn: You need to upload to the ECU again with 1.5.6 "automatic gear, manual transmission is not the problem, because when i load my calibration in PC the error appears. There...

I have the same problem

jbaker Can You show your scheme of connection for digital unit? I made a male 3.5mm jack and connected signal (yellow wire) and ground (black) to the 4 pin connector on the Hondata digital input: Here you can see where I connected the 4 pin connector. I connected the black wire to ground and yellow...

jbaker
Can You show your scheme of connection for digital unit?

My friends has same problem.

avtomat gear


tiptronic gear

Bard
+1