Search found 78 matches

by Slip_Angle
Tue Dec 01, 2009 4:11 pm
Forum: K-Pro / KManager
Topic: Individual cylinder trim and knock count
Replies: 7
Views: 3519

Individual cylinder trim and knock count

I see flashpro has these capabilities. Will Kpro ever have the ability to count knock by cylinder and trim ignition by cylinder?

This would be an awesome addition.
by Slip_Angle
Sat Nov 28, 2009 9:37 pm
Forum: K-Pro Calibrations
Topic: Cranny can you please check datalog
Replies: 37
Views: 13564

well its not like were doing this on a dyno , so im just feeling it out based on his feedback buddy , thats all. ive seen a few k24 hybrids that love 30cam all the way almost so. for no other reason buddy. if he says it doesnt feel as good again , ill drop it down a notch lower than before , try ag...
by Slip_Angle
Sat Nov 28, 2009 6:14 pm
Forum: K-Pro Calibrations
Topic: Cranny can you please check datalog
Replies: 37
Views: 13564

cranny wrote:always keep the newest version yes.

made a couple changes to the cam angles. see if it feels any better to you. your fuel is pretty good , part throttle and WOT.
Cranny,

Curious as to why your choosing such high cam angles in the upper RPM range?
by Slip_Angle
Sat Nov 28, 2009 8:26 am
Forum: K-Pro Calibrations
Topic: Cranny can you please check datalog
Replies: 37
Views: 13564

slip_angle what are your dyno numbers and wich dyno did you use? Street tuned using Theta Dyno, so no numbers. Not sure if your familiar with Theta Dyno but it graphs your power curves similar to a normal dyno based on your runs at each cam angle. I have power curve pics I can share. The K24 needs ...
by Slip_Angle
Thu Nov 26, 2009 5:35 pm
Forum: K-Pro Calibrations
Topic: Cranny can you please check datalog
Replies: 37
Views: 13564

Re: mew mods

Cranny, I just recently added CAI,hondata intake manifold gasket, 2006 acura tsx throtle body. Do we still work from the initial tune? Remus, Not to get in the way of your tuning but our cars have very similar mods and I've put a fair bit of work and fine tuning into my calibration.. You may want t...
by Slip_Angle
Mon Nov 23, 2009 6:26 pm
Forum: K-Pro Calibrations
Topic: Cranny can you please check datalog
Replies: 37
Views: 13564

Alternative

Here's my K24a2 calibration if you want to give it a shot...
by Slip_Angle
Mon Oct 05, 2009 6:32 pm
Forum: K-Pro / KManager
Topic: Cold Weather Knocks
Replies: 1
Views: 1200

Cold Weather Knocks

My calibration is tuned fairly well and rarely knocks. Now that the weather is getting colder (IAT = ~50) I see more knocks. Temperature compensation for ignition only deals with higher temps.

What can be done? Remove a couple degrees in all maps?
by Slip_Angle
Fri Oct 02, 2009 6:44 pm
Forum: K-Pro / KManager
Topic: KManager V1.3.8 beta
Replies: 13
Views: 7247

My ECU has this problem.

Curious if there is any net effect of having this issue?
by Slip_Angle
Fri Sep 25, 2009 7:20 pm
Forum: K-Pro / KManager
Topic: Cam angle "Jitter"
Replies: 8
Views: 4323

Hondata, does the datalog look OK/normal now? Still seems abit abnormal to me.. Please review and let me know. I also checked and cleaned the two ground connections.
by Slip_Angle
Sat Sep 19, 2009 5:35 pm
Forum: K-Pro / KManager
Topic: Cam angle "Jitter"
Replies: 8
Views: 4323

The VTC screen was dirty so I swapped it out. No change in the jitter. I then swapped out the VTC solenoid and the jitter was reduced by about 90-95%. I would have expected the problem to either go away completely or not at all.. One other thing I noticed is that camcmd doesn't follow what's in the ...
by Slip_Angle
Thu Sep 17, 2009 7:52 pm
Forum: K-Pro / KManager
Topic: Cam angle "Jitter"
Replies: 8
Views: 4323

No, that is not normal. Try cleaning the VTC solenoid and VTC filter (near #1 intake runner) to see if it helps. I'll check these on the weekend. I posted this on another forum and someone pointed out that ignition was doing the same thing in my datalog. If you put ignition together with the cam an...
by Slip_Angle
Wed Sep 16, 2009 8:45 pm
Forum: K-Pro / KManager
Topic: Cam angle "Jitter"
Replies: 8
Views: 4323

Cam angle "Jitter"

02 Civic Si - PNF ECU
Kmanager 1.3.7.0
K24a2 swap, headers, exhaust, secondary o2 disabled, functioning cat...
K24a2 is stock (no vtc changes, no cams etc..)

Is it normal to have this sort of cam angle jitter as seen in my datalog? Cam is close to camcmd but it looks very wavy.
by Slip_Angle
Sun Aug 02, 2009 3:26 pm
Forum: K-Pro / KManager
Topic: Rewriting limit?
Replies: 2
Views: 2088

Re: Rewriting limit?

Accord03 wrote:Is there a limit to how many times the K-Pro can be re written? like every change you make and upload the map before the K-Pro stops rewriting itself?
Good question. Since I've had Kpro I must have re-written a thousand times...
by Slip_Angle
Sat Jul 11, 2009 3:22 pm
Forum: K-Pro / KManager
Topic: K24a2 Overheating Calibration?
Replies: 7
Views: 4297

I don't know what type of car the K24 is installed in but when put in an EP3 chassis we need to jack the front end of the car high to get all the air out of the system.

May not apply in this case but food for thought.
by Slip_Angle
Thu May 21, 2009 6:29 pm
Forum: K-Pro / KManager
Topic: PNF + Tunerview II Problem
Replies: 6
Views: 2900

Here is the datalog from startup.