Is there any way to change the values in this table? I'm asking because I'd like to run slightly lean at idle and cruising while using closed loop fuel control.
Thanks.
Search found 51 matches
- Fri Jun 22, 2018 9:04 am
- Forum: s300 / SManager
- Topic: Target Lambda table
- Replies: 4
- Views: 1719
- Thu Jun 14, 2018 3:49 pm
- Forum: s300 / SManager
- Topic: CL1 Euro R w/ Hondata
- Replies: 5
- Views: 1454
Re: CL1 Euro R w/ Hondata
I have that the Euro R IM on my OBD1 H22, you need the adapter plate from Rosko Racing along with a 2 wire IACV. The 2 wire IACV's are all pretty much the same other than the elbows for the coolant hoses, I've used all types of H and F series IACV's with no problem, usually whatever I have lying aro...
- Wed Jun 13, 2018 12:36 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
As you can see I also altered the voltage increments to match the sheet I had rather than trying to use what the software generally has set to make it much easier to enter in rather than trying to do a bunch of math.
- Thu May 24, 2018 6:15 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
Well I wanted to reduce them down to 310cc where they should be mainly because of the throttle tip being wacky. Seems like it was tossing too much fuel in whenever there was an abrupt throttle increase. I did this and based on how much I changed the idle area in the map percentage wise I just applie...
- Sun May 20, 2018 4:06 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
I started to redo it some using 310cc as the setting, that site does say 330cc but you have to remember that they test at 3bar or around 43.5psi. So to be certain between the 2 I'm going to do a fuel pressure test with the regulator disconnected since the stock spec with regulator disconnected 33-40...
- Wed Apr 18, 2018 6:19 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
Can the info here be used at all? http://injector-rehab.com/shop/lag.html I notice they list them as 330cc, I was playing around with the another tuning software (AEM) to see that they had *stock* OBD1 H22A injectors listed as 330cc as well. Why the F is there so much conflicting info out there?! I ...
- Tue Mar 20, 2018 10:43 am
- Forum: s300 / SManager
- Topic: SManager software requests
- Replies: 336
- Views: 1518012
Re: SManager software requests
Would love to see some knock monitor support with the s300 for aftermarket knock sensors such as Phormula KS4, Link knockblock, Plex knock monitor etc. To be able to work with these knock monitors to automatically pull timing based on knock sensor input would be a great failsafe! This, along with s...
- Thu Mar 15, 2018 3:42 pm
- Forum: s300 / SManager
- Topic: Changing dead times on a pretty much finished tune?
- Replies: 5
- Views: 2931
Re: Changing dead times on a pretty much finished tune?
Here is another guide though I haven't had the time to play with mine yet.
viewtopic.php?f=19&t=21081
viewtopic.php?f=19&t=21081
- Mon Mar 05, 2018 7:27 pm
- Forum: s300 / SManager
- Topic: Bug with Undo/Redo in Tables?
- Replies: 6
- Views: 1669
Re: Bug with Undo/Redo in Tables?
It did highlight columns 1 and 2 green as if they were changed but I don't think they actually moved, was like some odd glitch since I did alter those 2 entire columns before the last save.
- Mon Mar 05, 2018 10:59 am
- Forum: s300 / SManager
- Topic: Bug with Undo/Redo in Tables?
- Replies: 6
- Views: 1669
Re: Bug with Undo/Redo in Tables?
There is some odd behavior there. Increasing 2 cells 1% at a time, 1 cell at a time the second undo changes both cells simultaneously. It could possibly have something to do with 1% of a given number isn't going to be the same value of a larger number but I'm not sure. The undo's and redo's should b...
- Tue Feb 27, 2018 6:37 am
- Forum: s300 / SManager
- Topic: SManager software requests
- Replies: 336
- Views: 1518012
Re: SManager software requests
Sorry to double post but since I can't seem to edit my posts at least not yet but it would probably be helpful to a lot of people to have the stock H series injector sizes and dead times in the quick select menu.
- Tue Feb 27, 2018 6:35 am
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
As far as the other voltage values I assume I would just add/subtract the same amount as I did from the values closest to the target voltage and that would probably be close enough?
It's annoying that there isn't really any info or a quick select in the software for these injectors.
It's annoying that there isn't really any info or a quick select in the software for these injectors.
- Mon Feb 26, 2018 9:30 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
As long as you're certain the size is 310cc since I'm searching to find some say 310, 320, 325 and 340. I'm in FL and the weather is kinda wonky this time of year but I had messed with the IAT table some but had no success with that.
- Mon Feb 26, 2018 8:53 pm
- Forum: s300 / SManager
- Topic: SManager software requests
- Replies: 336
- Views: 1518012
Re: SManager software requests
I'm a big time hotkey user and I was kinda surprised that there are no hotkey assignments for controlling the datalog playback. Would be nice to have hotkeys rather than going into the menu under datalog or opening the graph window.
- Mon Feb 26, 2018 3:36 pm
- Forum: s300 / SManager
- Topic: Stock 93-95 Prelude Si VTEC injectors?
- Replies: 19
- Views: 7186
Re: Stock 93-95 Prelude Si VTEC injectors?
I'm using the stock injectors that came with the JDM H22A engine, it was just something I noticed and there is a lot of conflicting info out there.