Hondata

Spunkster, appreciate if you check this with Hondata and revert. Thanks.

In the help file (and calibration) we have Tip-in Fuel Normal At 31F ECT: "Rate" is 77 At 145F ECT: "Rate" is 128 1) What does the lower number (77) represent vis-a-vis the higher number (128) I would have thought a bigger enrichment (i.e. larger "rate" number) is requi...

What is the typical sampling rate (MHz range) for a laptop/USB 2.0 (and USB 3.0) datalog, and is On-board faster?

The ECU generally switches to closed loop at around 150F, but it is a complicated decision based on IAT, ECT and vehicle speed. Even with closed loop you should get the AF close to target. Probably you might need to look at ECT compensation. Post a datalog and the calibration if you want us to comm...

Software option to remove (i.e turn off/on) ECTc Fuel Trim "buffer" to enable tuner to immediately see impact cold start tune, before O2 sensor warms up.

Also more transparent Post start fuel control in terms of independently controlling time and enrichment fuel

Try retarding timing at low load col 1-4 and retune AFRs

Better to use a CAN-based Wideband interface for WOT Closed Loop for a faster response.

Can we clarify on how this [tps>tip-in fuel] differs with the tip-in under [fuel trim] ?

Sticky FPR?
Has harness been cut for VAFC before etc (VSS/MAP)?

Is there a temperature threshold for this? Does it trigger when the engine is the warming-up? If so what is the ECT cut off?

Please release Flash Pro for this ASAP.

Google Honda Charging System (ELD is part of it)

Here's a link http://www.learntotune.com/discussions/topic/thoughts-on-decel-cut/ "Some ECUs will allow the timing to be retarded during overrun fuel cut off while others don’t. This can help reduce engine torque, making the engine less responsive which in turn can make the transition to fuel c...

How do we get a CSV file for the all the DDE Server data (like when we use the Datalog>Export in the "Graph" window)?

Thanks. Any recommended tools/links to write a CSV file (that can be imported to excel) from DDE?