Hondata

Do you have a cold air intake or not?

Have fun :P

Copy these maps into a Civic Type R map so everything works correctly. (All low/high cam fuel,ignition and cam angle maps)

Then get a wideband o2 sensor, do a 3rd gear datalog from 2k-redline, post it up, and i will fix it.

This is prolly a silly question, but do you have an aftermarket intake? How does VTEC feel? Get me another datalog, just like the last one but try and get more 3rd gear pulls in if you can. Also where are in Spain you from? You are only pulling 910-930~mbar so I was wondering if you were at high ele...

The only time I get knock is when the compensation tables have to kick in.

Since i often see 140+ IATs, the compensation takes away like 5 degrees ignition timing, which makes the car noticeably slower throughout a good portion of the year . (Since I live in Texas)

Do 3rd gear pulls.

You can do a long datalog if you want, uncheck open loop, and do like 2-3 WOT 3rd gear pulls just like the one you did in second.

Dont shift from 2-3, put it in third then punch it.

When I was tuning my car, the car would basically hit a wall if the ignition compensation for HIGH load was not either 0.00 or stock values. I tried using a 0.00 2.50 5.25 compensation when this occurred. I checked the datalog and it wasnt lean cut. Can you input different values into these tables a...

Do a datalog and post it up. Id love to tune an k24A1.

Try and find out what that accord kal is from and see if you can use those maps. It seems to be pretty good.

I must have missed where it said 06 TSX cams where installed. I have a good map I made for an 06 TSX so maybe you can try that one. The only problem is I think this motor was in an RSX, so you will need to copy and paste the maps into a TSX map or just copy the highcam tables into SlipAngles map. Th...

Keto, anyone that would like to help me is invited to. So thanks to everyone. Thought I would post this http://www.k20a.org/forum/showthread.php?t=67739 Like I said, if Slip_Angle has a lot of work into his, and since his is similar to that one, I recommend using it. Though I would try the kal it r...

Ok. So I know my opinion means very little but I wanted to say something. I used the Razdyno program and compensated for the weight of the TSX and the gear ratios and then graphed it and although the numbers are prolly off, the one thing that showed was the torque drop off is pretty serious from aro...

Same story. Load this one. Do a datalog. Post it up. Anything else, you're on your own.

oh well dont put that map on there until you do or add a bunch of fuel to the highcam....

try it and do a datalog and post it up. make sure to get good long 3rd gear runs at FULL WOT. Enable Lean Protection.

so do you want a kal for the PRC mani or the RBC Mani?