Search found 137 matches

by Nazul
Sun May 05, 2013 7:12 am
Forum: K-Pro Calibrations
Topic: Need a safe map for k20a2 i/h/e/rbc
Replies: 5
Views: 4332

Re: Need a safe map for k20a2 i/h/e/rbc

Why do u lower the cam angles so fast in vtec keto?
In my tune it stays 50° for a longer time and the lowest is 35°
by Nazul
Thu Apr 25, 2013 6:18 am
Forum: K-Pro Calibrations
Topic: Dip in torque curve
Replies: 18
Views: 10954

Re: Dip in torque curve

Any thoughts Keto?
by Nazul
Wed Apr 24, 2013 7:55 am
Forum: K-Series Reflash
Topic: Reflash Check...
Replies: 7
Views: 4977

Re: Reflash Check...

I believe they need to make a lot more clear yes, this is the second thing i hear right now.
by Nazul
Wed Apr 24, 2013 7:53 am
Forum: s300 / SManager
Topic: CEL no hondata error code
Replies: 22
Views: 5480

Re: CEL no hondata error code

The irridium plugs have nothing to do with it, those are oem plugs and they work fine on my car
by Nazul
Tue Apr 23, 2013 3:52 pm
Forum: K-Pro Calibrations
Topic: Dip in torque curve
Replies: 18
Views: 10954

Re: Dip in torque curve

Red is before tune grey after

Top curves is torque
Others horsepower bhp and whp
by Nazul
Tue Apr 23, 2013 1:53 am
Forum: K-Pro Calibrations
Topic: Dip in torque curve
Replies: 18
Views: 10954

Re: Dip in torque curve

Dyno AFR was tuned, but just not showing on the map, AFR was 12,8 above 3000 rpm and 12,5 near max RPM. What can be better in your opinion? Do you believe the dip can be removed by mapping or is it a setup limitation? AFR was fine around 4500 rpm btw. And what about oil consumption, can it be caused...
by Nazul
Mon Apr 22, 2013 2:29 am
Forum: K-Pro Calibrations
Topic: Dip in torque curve
Replies: 18
Views: 10954

Dip in torque curve

Since my car has been tuned there has been a dip around 4200 -4700 rpm. My tuner tried everything to get this away but did not succeed. He told me this is caused by the 16 valves effect. Though VTEC engages at 3500 in open loop, torque does not mount immediately after it. I wonder if this is normal ...
by Nazul
Mon Apr 22, 2013 2:23 am
Forum: K-Pro Calibrations
Topic: Kpro oil consumption
Replies: 2
Views: 1994

Re: Kpro oil consumption

Currently my car uses, 1 liter on 2000 km, is that a lot or normal consumption? VTEC from 3500 RPM and redline 8600 RPM on Valvoline maxlife 10W40
by Nazul
Fri Apr 19, 2013 6:56 am
Forum: K-Pro Calibrations
Topic: Kpro oil consumption
Replies: 2
Views: 1994

Kpro oil consumption

Dear guys, Can a car start burning more oil on a calibration with kpro on K20A2? What circumstances can cause this? AFR too rich or too lean? Too aggressive cam angles? Timings perhaps? My car was kprod and calibrated by an authorized tuner to make 242 BHP 232 nm torque My setup is: ITG maxogen airb...
by Nazul
Tue Apr 02, 2013 10:47 am
Forum: K-Pro Calibrations
Topic: Does anyone have a map fo K20A2 please? RBC, 3" Exhaust?
Replies: 6
Views: 3376

Re: Does anyone have a map fo K20A2 please? RBC, 3" Exhaust?

U have to wire up the second one as well, even if u dont use it. Otherwise it will give u a cell.
by Nazul
Tue Apr 02, 2013 10:27 am
Forum: K-Pro / KManager
Topic: Kpro removal
Replies: 8
Views: 3563

Re: Kpro removal

So why do you assume people would know this since it is possible with the s300, flashpro, traction control, please do explain! Dont worry about me, you can worry about all the other ones in Belgium now, who think this is a disgrace. I dont know one guy here who knew this was impossible so I dont bel...
by Nazul
Tue Apr 02, 2013 8:07 am
Forum: K-Pro / KManager
Topic: Kpro removal
Replies: 8
Views: 3563

Re: Kpro removal

So my friend is obliged to buy another ECU if he wants to sell his hondata? He is not able to sell it seperately? You know that this way of business is illegal in Europe, and the fact that u not included it in the manual? A client should always have the right to resell its property, this is impossib...
by Nazul
Tue Apr 02, 2013 6:05 am
Forum: K-Pro / KManager
Topic: Kpro removal
Replies: 8
Views: 3563

Re: Kpro removal

Any feedback on that?
by Nazul
Mon Apr 01, 2013 12:25 pm
Forum: K-Pro / KManager
Topic: Kpro removal
Replies: 8
Views: 3563

Re: Kpro removal

And why is that? Why is that not noted anywhere in the manual, website, box, wherever in capitals, so people would know this before kpro'ing it? What right does your company have in making this choice for the client without informing him? Sounds to me that you are deliberately hiding this from people?