Hondata

Hondata wrote: ↑Fri Mar 09, 2018 3:14 pm Can you use the 'send support information to Hondata' function?

Yes, I have just done!

Hi Hondata, i have a problem with the unlocking Flashpro from the vehicle. I must replace my ECU. I have ECU return to stock. Now i would like to unlock Flashpro from my vehicle and the following massages pops up, although I have an internet connection like this: error.JPG Please help me quick! Than...

If you are using a 64bit version of Windows, try this: Right click on the shortcut you are using to launch FlashPro manager, and click properties, then under target, change "FlashProManager.exe" to "FlashProManager64.exe". I have already try this, but it makes no differences in ...

Yes, with pleasure, no problem! :-)
Please let me know!

No, you don't need the IAT-relocation, so that the cal is working!

This is only a improved thing i made, because it is better to tune, if the IAT-temps are correct (after compressed supercharger air and temp, instead before supercharger and uncompressed air and temp).

Where is the G101 on FN2/K20Z4?

Thanks!

Is there any chance you can upload your tune? I can then show the tuners and ask them to replicate it because they’re adamant it can’t be done. No sorry, it was very much work and time to make it pefect to my car/engine! But a good tuner should that know! Again, post your cal and i can help you! A ...

I am also using the TTS-Rotrex Kit on my FN2 and ive never had any problems. Now i am using a Hybrid calibration on my rotrexed FN2 (AFM- and MAP-Sensor activated) and have no problems. But it is necessary, that you tune both (AFM- and MAP-fuel-tables) to run perfect. In my case, both sensors are ac...

Hondata,

is the PGM-FI Main Relay 1 (FI-Main) inside or outside the ECU of my FN2/K20Z4?

If outside, where can i find the relay?

Thanks!

For clarification: AFM/MAF-based map (supported): afm.JPG Fuel display (supported): afm-hybrid.JPG (AFM/MAF-based maps are without MAP-Fuel tables.) Hybrid-based map (supported): hybrid.JPG Fuel display (supported): afm-hybrid.JPG (Hybrid-based maps are with MAP-Fuel tables. In this case MAP-fuel ta...

Hi Hondata, since i have running the new and previous Flashpro Manager software/firmware, the following two errors were present: WhatsApp Image 2017-12-11 at 11.58.35.jpeg WhatsApp Image 2017-10-04 at 22.44.16.jpeg At previous versions of Flashpro Manager, i don't have this errors! The P2610 is disa...

First, please read this thread completely: http://www.hondata.com/forum/viewtopic.php?f=28&t=17506 If you use a Race Map (not longer supported by Hondata), then the inputs have no impacts. The settings are only operate, if you use a AFM-based or Hybrid-based calibration. If you post your calibra...

Issue for: Civic SI/FN2 (Type-R) 2006: If gear is in neutral and the clutch is not pressed, the engine is revving high until limiter! (overrevving) Is this normal? Before the engine stop revving until 4500 rpm. Please fix this. Thx Yes, this function is unfortunately no longer available, since the ...

It is not possible to download the new version via Flashpro Manager:

Hondata wrote: ↑Mon Nov 13, 2017 5:03 pm [2006 Si/FN2][2012 Si][2016+ Turbo Civic] Added datalogging of wheel speeds.

Where i can find this feature on the FN2?

Hondata wrote: ↑Mon Nov 13, 2017 5:03 pm [2016+ Turbo Civic] Added datalogging of steering, brake and clutch position.

Is this also possible for the FN2?