Search found 78 matches
- Sat May 22, 2010 6:43 am
- Forum: K-Pro Calibrations
- Topic: 06 TSX Calibration
- Replies: 10
- Views: 5430
Hey Slip Angle, Just wondering if you've had a chance to finish your map? Sure, I've attached the latest version. I changed cruise to 25* VTC and modified some of the open loop angles. Fine tuned ignition for any knocking and added 10* IGN retard at 130 degrees IAT. Let me know how it works for you...
- Tue Apr 27, 2010 9:54 pm
- Forum: K-Pro Calibrations
- Topic: 06 TSX Calibration
- Replies: 10
- Views: 5430
Hey slip angle, Do you have a new map for the 06 tsx intake cam? I am about to switch to the same intake cam on my k24a2. I am running your old map (adjusted for A/F of course) you uploaded and its by far the best map I've used. Sure, no problem. It's not complete yet because my O2 sensor went on m...
- Thu Apr 08, 2010 9:42 pm
- Forum: K-Pro Calibrations
- Topic: '06 TSX intake cam in a 2004 k24a2
- Replies: 6
- Views: 4951
bump - still looking for a definitive answer on running the '06 intake cam on a '04 tsx motor... hondata was never real clear on what motor you can safely advance to 45 vtc. the 06 motors have deeper valve reliefs in the pistons... sooo once again does anyone know what kind of advance we can run on...
- Tue Apr 06, 2010 3:14 pm
- Forum: K-Pro Calibrations
- Topic: 06 TSX Calibration
- Replies: 10
- Views: 5430
06 TSX Calibration
Is there a calibration for the 06+ K24a2? Even direction on what cam angles the 06 K24a2 likes for closed and open loop would be a great start. I just installed the 06 Intake cam on my 04 K24a2 and A/F is all over the place now. I didn't think a cam would make things so different but I don't want to...
- Mon Mar 15, 2010 7:34 pm
- Forum: K-Pro / KManager
- Topic: car dies while updating maps.
- Replies: 2
- Views: 1518
- Sat Jan 30, 2010 1:00 pm
- Forum: K-Pro Calibrations
- Topic: Very new, first from ISRAEL need MAP for K24+K20A2 (12.5:1)
- Replies: 3
- Views: 2084
- Tue Dec 15, 2009 10:07 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580
Re: Snow in Montreal
Cranny, I will try it as soon as possible.We received 15 inches in only two days. Slip_angle how can I copy all you part throttle tables without re writing every single number? What can we do to remove the jerkiness of the car? Thanks to all of you guys. Also added a latest run of my original set u...
- Mon Dec 07, 2009 4:41 pm
- Forum: K-Pro / KManager
- Topic: Individual cylinder trim and knock count
- Replies: 7
- Views: 3520
- Fri Dec 04, 2009 11:16 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580
I used the Razdyno program and compensated for the weight of the TSX and the gear ratios and then graphed it and although the numbers are prolly off, the one thing that showed was the torque drop off is pretty serious from around 4100 and after. I dont know what to tell you but it seems like it mig...
- Fri Dec 04, 2009 11:04 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580
First off Cranny, are you able to elaborate on why the initial tune isn't good? Is it because part throttle and wot on the low cam aren't good? Is the AFR way off on the high cam, or fuel curves are too spiky and not smooth enough? Maybe because of the knocks generated or the cam angles look all ov...
- Fri Dec 04, 2009 10:49 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580
Keto, anyone that would like to help me is invited to. So thanks to everyone. Thought I would post this http://www.k20a.org/forum/showthread.php?t=67739 Like I said, if Slip_Angle has a lot of work into his, and since his is similar to that one, I recommend using it. Though I would try the kal it r...
- Thu Dec 03, 2009 9:05 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580
Slip_angle I did try it and did not like the throttle let go when i would step on/off the gas. The WOT run was okay. The immobilizer was enabled and I couldn't start my car. I disabled it and it started. I left the multiplexer on normal operation, what does it do and do I leave it as is. Log includ...
- Wed Dec 02, 2009 9:56 pm
- Forum: K-Pro / KManager
- Topic: Individual cylinder trim and knock count
- Replies: 7
- Views: 3520
- Wed Dec 02, 2009 4:58 pm
- Forum: K-Pro / KManager
- Topic: Individual cylinder trim and knock count
- Replies: 7
- Views: 3520
Though I can't answer for them... I will venture the answer's no. The stock Honda ECU has special circuitry for only one knock sensor. What you're asking for requires a lot of engineering to do right; just adding three more sensors is no guaranty of picking up knock on only that cylinder. Then ther...
- Tue Dec 01, 2009 4:13 pm
- Forum: K-Pro Calibrations
- Topic: Cranny can you please check datalog
- Replies: 37
- Views: 13580