P28 s300,

Hondata model coverage & ECU application questions.
Post Reply
skateruptown
Posts: 2
Joined: Fri Apr 09, 2010 10:40 pm

P28 s300,

Post by skateruptown »

So i bought a P28 chipped with s300 of a friend, my car is the non vtec d15b7 and my ecu is the P06. Will i have to take the chipp out of the P28 and swap it to my P06, or are you able to tune the P28 to a P06 standard?
scttydb411
Posts: 90
Joined: Sun Jul 23, 2006 11:10 am

Post by scttydb411 »

u can use the p28 and tune it to the non-vtec motor by using the proper maps and dis-abling/unchecking the vtec.

if u want to use your p06, you'll need to get a jumper, 74hc373 chip, 1k resistor, and 32 header pins to install the s300 daughterboard from the p28 into the p06.
HONDATA DEALER/TUNING IN ATLANTA!!
DIGITALBOXTUNING
678-614-3596
Post Reply