2002 rsx base with a k20z3 swap?

Hondata model coverage & ECU application questions.
Post Reply
Pospeshil
Posts: 2
Joined: Sun May 12, 2013 1:27 am

2002 rsx base with a k20z3 swap?

Post by Pospeshil » Sun May 12, 2013 1:45 am

I have a 02 Rsx base and got a hold of a 09 civic SI K20z3 motor built up... what ECU do I need to make it run?

this is what the K20z3 has done to it

Cams are kelford stage 1
pistons are Wiseco heat treaded
rods are stock and balanced
all new bearings
scunk2 s/s valves, buddyclub springs and retainers
Head is studded with APR bolts
3 angle valve job and more
520cc injector

It was set up with a ct supercharger with a ecu relash I have that ecu too but I don't think it will work in my 02 RSX right?

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2002 rsx base with a k20z3 swap?

Post by Hondata » Mon May 13, 2013 8:42 am

If using the 5 speed transmission then the stock (PND) ECU is fine, otherwise you will need a type S ECU.
Hondata

Post Reply