Good day, I tried searching the forum for an answer before asking this but I couldn't find a solution.
I have a 2005 Accord with a cable TB and I changed the engine and transmission to that from the TSX (3-lobe VTEC) with DBW
Since the K24 from the TSX comes with DBW, I reused my cable TB and old ECU.
I would like to put the TSX ECU in but I will have problems seeing that I am not using the DBW Throttle body ( or so I believe)
My Question is, Can I use the FlashPRO or anything else to fix this in the TSX ECU? (Change from DBW to cable TB)
I want to use the TSX ECU because the transmission is different from my original transmission and I didn't want to have any problems with the gears changing
I am clueless about these stuff so excuse me if my question was a stupid one...
Oh BTW, I live in the Caribbean so the 2005 Accord original engine was the K20A7
DBW to Cable Throttle
Re: DBW to Cable Throttle
No we do not offer anything that will allow you to do this type of change. You will have to use a normal throttle body.
-
- Posts: 2
- Joined: Wed Jul 16, 2014 9:28 am
Re: DBW to Cable Throttle
Thanks Spunkster, by "use a normal TB" do you mean to use the DBW TB? Because then I will have to convert everything else in the car to facilitate the DBW (pedals etc)
I would have just used the cable TB with the K20A7 ECU but then I may have shifting problems with the transmission because it also came with the K24 (I'm assuming that the ECU also controls the shifting in the transmission)
I would have just used the cable TB with the K20A7 ECU but then I may have shifting problems with the transmission because it also came with the K24 (I'm assuming that the ECU also controls the shifting in the transmission)
Re: DBW to Cable Throttle
We do not offer any tuning solutions for this type of swap. You will have to use what works best in your situation.