trouble with plx sm afr

Hondata model coverage & ECU application questions.
Post Reply
tweenpix
Posts: 20
Joined: Wed Sep 21, 2011 7:03 am

trouble with plx sm afr

Post by tweenpix »

hello i have trouble with PLX SM AFR, when i add extra fuel, my gauge is show "LEAN", but must show "REACH".
voltage is 5v on d14 when is show lean

https://www.youtube.com/watch?v=NyBx1NYZIy4

bad sensor or bad controller plx?

datalog and calibration with video
https://youtu.be/5lCRFkfdJE8
You do not have the required permissions to view the files attached to this post.
Last edited by tweenpix on Wed Oct 12, 2016 9:59 pm, edited 1 time in total.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: trouble with plx sm afr

Post by Spunkster »

Do not use D14 as it cannot read the full voltage range. Use D10 or one of the other inputs instead.
tweenpix
Posts: 20
Joined: Wed Sep 21, 2011 7:03 am

Re: trouble with plx sm afr

Post by tweenpix »

Spunkster wrote:Do not use D14 as it cannot read the full voltage range. Use D10 or one of the other inputs instead.
my p28 is modified for read 0-5v on D14

i can set fuel in calibration and my engine work in IDLE on 19-20 afr

if i set more fuel and my afr less then 10.5~11 PLX is showing LEAN, if i decrease fuel ~% and my AFR more then ~10.5-11 PLX is show actual AFR
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: trouble with plx sm afr

Post by Spunkster »

Without the calibration and a datalog it is impossible to speculate.
tweenpix
Posts: 20
Joined: Wed Sep 21, 2011 7:03 am

Re: trouble with plx sm afr

Post by tweenpix »

Spunkster wrote:Without the calibration and a datalog it is impossible to speculate.
update first post
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: trouble with plx sm afr

Post by Spunkster »

If you are referring t the 1 minute mark then it appears to be reading correctly as the voltage in put is around 5 volts and it is showing it is very lean.

If it is reading incorrectly on the PLX itself, you might want to contact them for assistance to determine why it is reading inversely.
tweenpix
Posts: 20
Joined: Wed Sep 21, 2011 7:03 am

Re: trouble with plx sm afr

Post by tweenpix »

Spunkster wrote:If you are referring t the 1 minute mark then it appears to be reading correctly as the voltage in put is around 5 volts and it is showing it is very lean.

If it is reading incorrectly on the PLX itself, you might want to contact them for assistance to determine why it is reading inversely.
thanks
tweenpix
Posts: 20
Joined: Wed Sep 21, 2011 7:03 am

Re: trouble with plx sm afr

Post by tweenpix »

i'm resolve problem.
replace WB sensor
Post Reply