01 ITR and s200 Q

TypeRPaul · Post by **TypeRPaul** » Tue Dec 03, 2002 12:23 pm

I want to get the s200 unit but what else do i need to buy? Here is what i think i need:

-P28 ECU
-Skunk2 obd1 harness adapter
-s200

Is this it or do i need something else?

Also will the s200 work with a Toda Individual Throttle body set-up?

Jaker · Post by **Jaker** » Thu Dec 05, 2002 12:40 pm

Your OBD adapter does not have to come from Skunk2. It could be any of the reputable brands available from the various resellers (including Hondata).

Carchitect · Post by **Carchitect** » Sun Feb 09, 2003 10:07 pm

The components you have selected would work just fine. However, since the inndividual throttle body conversions utilize an exceptionally leagr plenum they will have the opportunity to flow a lot better than a barrel style plunum. Due to this I would suggest you go with at least 330cc/min injectors if not larger to feed the fuel you need. You also may need to get creative with a MAP sensor canister that utilizes four vacuum hoses from each intake port to give a smooth vacuum signal to the MAP sensor.

Joe.