S200 system and accessories needed?

jonyb · Post by **jonyb** » Wed Feb 26, 2003 8:37 pm

Hello all. I've got a 93 Teg PR4 with B20 block, turbo, 440CC's, and non-vtec head. I'm about to buy an S200 setup, but there is not a dealer close to me. I would like to be able to do my own programming and not depend on having to ship anything. What accesories do I need to be able to do this. I have looked at the pricing, but I need to know what is recommended so I don't order too much, or not enough. So far I think I need the base unit with turbo upgrade, Rom Editor 3.1, the programmer, the emulator, 3 bar map sensor, and I am going to get the 3-step rev limiter. What else, besides a laptop, would I need. Any help is appreciated. Thanks

John

QUICKSILVER RACING · Post by **QUICKSILVER RACING** » Thu Feb 27, 2003 12:07 am

You need datalogging option. Wideband O2. Ditch the emulator and use the Romulator for easier programming. You still need the Pocket Prog though.

You also need to solder the latch IC and EPROM socket.

Check out the manual if you can do it your self.