Basic Help for my '01 ITR Turbo...

Hondata model coverage & ECU application questions.
Locked
01ITR#700
Posts: 2
Joined: Mon Mar 31, 2003 8:32 am

Basic Help for my '01 ITR Turbo...

Post by 01ITR#700 »

I want to make sure I am getting all the correct components etc. and also wanted to get recomendations for injector size, and what fuel pump is recomended. My setup:

-'01 Integra Type R
-9.0-1 Arias Pistons
-stock rods
-Inlinepro Blockguard
I want to boost atleast 15-16psi with this setup. Below is what I belive I need...again, fuel pump and injector size recomdations are needed too.

I need:
-P28 chipped ECU with OBD2 connector
-S200 w/ boost
-3 Bar map sensor(already have a brand new GM)
-Injectors...720cc?
-In-tank Fuel pump...255?...255hp?

Anything else? My buddy has all the software etc...
Thanks for any and all info/help.
Mark
QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

The pump is OK at 255. The injectors are on the big side but it doesn't matter since you can adjust the fueling anyway. And you wouldn't be buying another set when you decide for more boost.

And get some decent rods. It's the weakest link.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
Locked