Hi
I'm from spain and i own a Honda Accord 2.4L (k24 engine) that is like the Acura TSX from US.
I would like to know if i can use a reflash or a KPro with my car? The only difference i found betwen Accord/TSX is that the intake throttle body from the TSX is by cable and the one from the Accord is electric...
Actually my car have been modified with TODA racing headers, HKS exhaust, Ogura Stage 2 clutch kit, Gruppem intake, Tein Monoflex, Cusco strut bar, etc.., and now i want to modifie ECU to adjust all. Now my Accord at DYNO gives 213HP (from base 190hp).
Thanks for all and excuse me for my poor english
KPRO or Reflash Euro Accord k24
Can you send me shot of inners of your ECM AccordKarsJDM wrote:Hi,
Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?
Thanks
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
Sorry for later in reply, but i have been out for holidays :oops:sass wrote:Can you send me shot of inners of your ECM AccordKarsJDM wrote:Hi,
Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?
Thanks
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine
I will send you the shots you ask for
Thanks for your time
Regards
Hi,sass wrote:Can you send me shot of inners of your ECM AccordKarsJDM wrote:Hi,
Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?
Thanks
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine
Here is the reference of my ECM
HONDA 37820-RBB-E02 Control module, engine
I will try to make some photos
Kind Regards