VTC oil control solinoid valve malfunction

mr2 · Post by **mr2** » Tue Mar 02, 2010 9:01 am

We received the harness and it is the wrong one. It is a drive by wire harness.

Can we make it work if we run the TPS wires separately?

Post by **Spunkster** » Tue Mar 02, 2010 10:44 am

No, you need to get the proper 02-04 harness.

mr2 · Post by **mr2** » Tue Mar 02, 2010 11:25 am

Where can we buy one and what does it cost (roughly)?

Post by **Hondata** » Tue Mar 02, 2010 4:56 pm

32110-PRB-A00, about $250. Make sure you get the 'WIRE HARNESS, ENGINE' not the 'WIRE HARNESS, ENGINE ROOM'.

The Euro EP3 harness should also work for you.

tehduckeggs · Post by **tehduckeggs** » Tue May 28, 2019 9:31 am

mr2 wrote: ↑Tue Mar 02, 2010 11:25 am Where can we buy one and what does it cost (roughly)?

@mr2

Hey man, did you ever end up figuring this out. I'm having almost the exact same issue. We've done all the normal troubleshooting as well and confirmed i have an 02-04 harness as well. I recently made a post here.

viewtopic.php?f=12&t=22306

If you have any information that would be a huge help.

VTC oil control solinoid valve malfunction

Re: