dang...i wish i knew what i was doing. this sux, i live in a cornfield with no tuner near by. i wish at least there was a basemap that worked for me for a stock k24a2 with bolt ons
rick_rabies wrote:dang...
i added fuel to the overall trim..
i wish i knew what i was doing. this sux, i live in a cornfield with no tuner near by. i wish at least there was a basemap that worked for me for a stock k24a2 with bolt ons
kb58 wrote:There are tuners who specialize in on-line tuning - check K20a.org
ya i know. i would like to have a basemap to run safely to get to a tuner...
hondata should provide basemaps that are set at dangerously lean settings :x
I`m new to this so please forgive my stupid questions...
How can I edit the AFCMD? If I change the values directly in the table, they remain the same. If I change the fuel in the tables (from 0 to 50 vtc) they still remain the same.
How can I force AFCMD 12,5 for example. many thanks
KPro doesn't support changing the target A/F ratio in closed loop - if you're in closed loop, your target AFR is 14.7. The only way you're going to change your AFR is by 1) only changing the WOT columns, as those should not be running in closed loop; or 2) shutting off closed loop so you can change your part throttle AFR.