Hondata

OK i have kpro 3 in a 2005 s2k. I have a aem 4100 wide band that the guage is reading and im get the correct output one the white wire. I cannot get the ecu to read the output. I belive the eld i should be using is e15? but this spot is not working. I changed grounds and still nothing. The wire is a white cream color and bigger then the others is this the right one? in kpro i have the eld enabled and the aem 4100 selected on digital input but still get nothing. what am i missing?

http://www.hondata.com/s2kpinout.html

You have the wrong pin for a S2000.

so then a30? its a black and white wire on the bottom right of the plug correct?

A30 is correct. We dont' go by color. Go by the actual pin position.

Then disable the eld in the parameter.

ok so a30 is the pin i need and I tried the pin in some of the files that look like a30 but didnt work then (look at picture below) the A connetor plug reads at bottom left 32 - to bottom right 25 suggesting that the 3 wire from left would be a30. this also didnt work. any one with a s2k thats done this before please let me know whats wrong. and i disabled eld. sorry for huge photo

Pinouts are read from the wire side, from the top, left to right with the clip at the top.

right which is what i thought reguardless of the numbers on the plug. now acording to the pic below it would be the 3 from the bottom right the green and red wire. I tried this also and it still not reading!

Draw a diagram of exactly how you have everything wired.