Page 8 of 10
Re: KPro / KManager requests
Posted: Mon Feb 12, 2018 4:32 pm
by Knox
I don’t want to keep asking too much time sorry about that but my customers keep asking to me and now 6 customer waiting kmanager update for rev limiter. Can you tell when you release an update for fixing ?
Hondata wrote: ↑Fri Jan 26, 2018 12:23 pm
Yes, it was from the change for the datalogging of the rev limiter. Let us test this out and see how much difference there is.
Re: KPro / KManager requests
Posted: Tue Feb 13, 2018 11:24 am
by Hondata
Can you test this version and let us know if it fixes the problem?
Re: KPro / KManager requests
Posted: Wed Feb 14, 2018 3:16 am
by Knox
Problem fixed. Thank you for support.
Re: KPro / KManager requests
Posted: Wed Feb 14, 2018 10:50 am
by Hondata
Ok, thanks for the feedback. Sorry it took so long to change.
Re: KPro / KManager requests
Posted: Thu Mar 29, 2018 11:21 pm
by retroid
please I need the previous V4.3.2 and V4.3.3 Kmanager versions.
if someone can help me , here is an email
autocom@email.com
many thanks and all the best
Re: KPro / KManager requests
Posted: Sat Apr 14, 2018 8:35 pm
by RAIN H8R
I would like to request rev limit by gear. In addition, the addition of rev limit recovery similiar to flashpro would be nice as well.
Re: KPro / KManager requests
Posted: Tue Apr 17, 2018 6:46 pm
by Justinthecoastie
Could we get a 'rich protection' for flex fuel users
Re: KPro / KManager requests
Posted: Wed May 09, 2018 5:47 pm
by DC5teggi
I would like to request that the flex fuel functionality be activated for PND and PNF calibrations. Running a PRB calibration is a work around that loses secondary runner controls for PND applications.
There’s no clear reason why this is deactivated for PND and PNF calibrations since a PRB calibration with this function will work on these ECUs, so hopefully this is something that can be accommodated with minimal effort in the next release!
Re: KPro / KManager requests
Posted: Wed Sep 12, 2018 6:39 pm
by J1000
I would like to second this request to activate Flex Fuel on the PNF. Just installed the sensor and wired it all up to my K-Pro and everything only to spend the last 2 hours wondering why I had fuel temperature showing up but no ethanol %.
I guess I will be looking into the PRB calibration work around. DC5teggi, can you shed any light on where I should start?
DC5teggi wrote: ↑Wed May 09, 2018 5:47 pm
I would like to request that the flex fuel functionality be activated for PND and PNF calibrations. Running a PRB calibration is a work around that loses secondary runner controls for PND applications.
There’s no clear reason why this is deactivated for PND and PNF calibrations since a PRB calibration with this function will work on these ECUs, so hopefully this is something that can be accommodated with minimal effort in the next release!
Re: KPro / KManager requests
Posted: Mon Sep 17, 2018 8:10 am
by Hondata
The PNF code has much less room than the PRB so we could not fit in flex fuel.
Re: KPro / KManager requests
Posted: Tue Sep 25, 2018 5:39 pm
by Jakermac
Is it possible to implement TPS based boost control with the current hardware?
Re: KPro / KManager requests
Posted: Wed Sep 26, 2018 8:47 am
by Hondata
Yes. I've add it to the request list.
Re: KPro / KManager requests
Posted: Sat Sep 29, 2018 12:16 pm
by Jakermac
Thank you. I'm still a somewhat long way off needing the feature (build progress is slow) but wondered if there was any kind of timeline on this feature: ie - 3 months, 6 months, unknown, imminent release?
Jacques
Re: KPro / KManager requests
Posted: Wed Jan 02, 2019 8:22 pm
by rtdavid
Just wanted to first thank Hondata for all their hard work. Would it possible to get a rev limiter that implements only spark cut/retard? Please! I've called and asked in the past, and was told that its on the list.
Dave
Re: KPro / KManager requests
Posted: Thu Mar 21, 2019 3:31 pm
by DC5teggi
If there is sufficient memory, can we have throttle tip in and overrun settings opened up for PND calibrations?