S2000 kpro a26 Power steering

K-Series Programmable ECU installation questions / support issues
Post Reply
RAIN H8R
Posts: 32
Joined: Wed Sep 14, 2011 3:00 pm
Location: Waukesha, WI

S2000 kpro a26 Power steering

Post by RAIN H8R »

The electronic power steering module on 00-05 S2000s sends a signal to the engine ecu via A26.

Is this function supported with kpro?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S2000 kpro a26 Power steering

Post by Spunkster »

Yes it is
RAIN H8R
Posts: 32
Joined: Wed Sep 14, 2011 3:00 pm
Location: Waukesha, WI

Re: S2000 kpro a26 Power steering

Post by RAIN H8R »

Thank you. Ive been using a26 for a datalog switch for years. My steering rack has failed, and Im looking to change pins due to the failure.

No other option on the manual datalog switch drop box will work for an S2000.

PSP is needed for the electric rack
SCS is needed for reading codes for SRS and EPS
Brake switch, only option but not sure it would be a good idea, not sure how this circuit effects anything
VTP Used for AC switch.

Any ideas?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S2000 kpro a26 Power steering

Post by Spunkster »

Brake switch will not effect anything else.
RAIN H8R
Posts: 32
Joined: Wed Sep 14, 2011 3:00 pm
Location: Waukesha, WI

Re: S2000 kpro a26 Power steering

Post by RAIN H8R »

I will do that. Thank you
Post Reply