Kmanager On line Ignition Off

K-Series Programmable ECU installation questions / support issues
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kmanager On line Ignition Off

Post by Spunkster »

Have you tried disabling the ELD in the calibration?
AresGR
Posts: 12
Joined: Wed May 02, 2018 6:19 am

Re: Kmanager On line Ignition Off

Post by AresGR »

hey spunkster, no i dont have. I dont know if its okay to disable it.

If it is okay i would disable it under "misc" right?

Today i have made a Datalog and i had another error Code P0132 Oxygen Sensor... First it was 1.4V and then after 5 mins. 4.1V. After that it felt down to 1.4V again...
AresGR
Posts: 12
Joined: Wed May 02, 2018 6:19 am

Re: Kmanager On line Ignition Off

Post by AresGR »

Anyone can help me out with p0132 oxygen sensor high voltage? Wiring is correct but i get this error code in kpro :/ i have a datalog too...
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kmanager On line Ignition Off

Post by Spunkster »

Has this been tuned on the dyno?
AresGR
Posts: 12
Joined: Wed May 02, 2018 6:19 am

Re: Kmanager On line Ignition Off

Post by AresGR »

no, not tuned on dyno
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kmanager On line Ignition Off

Post by Spunkster »

This sounds like a tuning issue, I would recommend that you get this properly tuned on the dyno. The tuner should be able to resolve this issue.

You can also follow the factory service manual for troubleshooting that error code.
AresGR
Posts: 12
Joined: Wed May 02, 2018 6:19 am

Re: Kmanager On line Ignition Off

Post by AresGR »

Ok. Spunkster can i give you my calibration and datalog? Maybe you can see if something is not correct in settings or something like that?

Thank you, great support!!
Post Reply