Hondata

Posted: **Tue Oct 16, 2018 10:19 pm**

Hi everyone, I have just picked up this Kpro V4 (Serial: 41894) which is socketed to a PPA-Q05 ecu. I keep getting the same error on all calibrations:
P1607-ECU Internal circuit Malfunction (Check calibration)

Now I'm starting to think the ecu is not compatible with Kpro even though PPA is listed as a compatible ecu

What are my options from here?

: Ecu; 20181017_155849.jpg (4.64 MiB) Viewed 1486 times

: 20181017_155903.jpg (4.4 MiB) Viewed 1486 times

Posted: **Wed Oct 17, 2018 7:53 am**

If it's a non US model then it seems it wont work viewtopic.php?f=12&t=21713

Posted: **Wed Oct 17, 2018 9:05 am**

That is not the ECU that K-Pro was originally installed into and it is not compatible.

Posted: **Wed Oct 17, 2018 12:58 pm**

Spunkster wrote: ↑Wed Oct 17, 2018 9:05 am That is not the ECU that K-Pro was originally installed into and it is not compatible.

This is what I feared :( if I obtain a compatible ecu, can i send both to a hondata dealer to be mated?

Posted: **Wed Oct 17, 2018 2:32 pm**

You need to discuss this with BYP Racing in Australia as this was sold to them.

Hondata

P1607-ECU Internal circuit Malfunction (Check calibration)

P1607-ECU Internal circuit Malfunction (Check calibration)

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Re: P1607-ECU Internal circuit Malfunction (Check calibration)