P1607-ECU Internal circuit Malfunction (Check calibration)

K-Series Programmable ECU installation questions / support issues
Post Reply
MajinDc2
Posts: 2
Joined: Tue Oct 16, 2018 9:53 pm

P1607-ECU Internal circuit Malfunction (Check calibration)

Post by MajinDc2 »

Hi everyone, I have just picked up this Kpro V4 (Serial: 41894) which is socketed to a PPA-Q05 ecu. I keep getting the same error on all calibrations:
P1607-ECU Internal circuit Malfunction (Check calibration)

Now I'm starting to think the ecu is not compatible with Kpro even though PPA is listed as a compatible ecu

What are my options from here?
Ecu
Ecu
20181017_155849.jpg (4.64 MiB) Viewed 1446 times
20181017_155903.jpg
20181017_155903.jpg (4.4 MiB) Viewed 1446 times
fonzeka
Posts: 98
Joined: Thu Feb 11, 2016 4:15 am
Location: Sweden

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Post by fonzeka »

If it's a non US model then it seems it wont work viewtopic.php?f=12&t=21713
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Post by Spunkster »

That is not the ECU that K-Pro was originally installed into and it is not compatible.
MajinDc2
Posts: 2
Joined: Tue Oct 16, 2018 9:53 pm

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Post by MajinDc2 »

Spunkster wrote: Wed Oct 17, 2018 9:05 am That is not the ECU that K-Pro was originally installed into and it is not compatible.
This is what I feared :( if I obtain a compatible ecu, can i send both to a hondata dealer to be mated?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: P1607-ECU Internal circuit Malfunction (Check calibration)

Post by Spunkster »

You need to discuss this with BYP Racing in Australia as this was sold to them.
Post Reply