Page 3 of 3

Re: Innovate LC1 wideband setup

Posted: Fri Nov 09, 2018 5:11 pm
by AREA876
I will try and then report

Re: Innovate LC1 wideband setup

Posted: Fri Nov 09, 2018 6:15 pm
by AREA876
Tried connecting LC1 12v source directly to the battery but no change
K20A3 Base Map-181109-002.kdl
(723.23 KiB) Downloaded 125 times

Re: Innovate LC1 wideband setup

Posted: Mon Nov 12, 2018 11:36 am
by AREA876
Any update on this problem

Re: Innovate LC1 wideband setup

Posted: Wed Nov 14, 2018 6:48 am
by AREA876
Any followup information on this issue.

Re: Innovate LC1 wideband setup

Posted: Wed Nov 14, 2018 10:12 am
by Spunkster
not yet

Re: Innovate LC1 wideband setup

Posted: Wed Nov 21, 2018 4:38 am
by AREA876
Any followup info

Re: Innovate LC1 wideband setup

Posted: Thu Nov 29, 2018 4:36 am
by AREA876
Anything yet?

Re: Innovate LC1 wideband setup

Posted: Thu Nov 29, 2018 10:17 am
by Spunkster
We have not been able to reproduce anything here.

Re: Innovate LC1 wideband setup

Posted: Thu Nov 29, 2018 4:48 pm
by AREA876
Do you have any suggestion as to what I can do to resolve my issue of A/F and analog not matching

Re: Innovate LC1 wideband setup

Posted: Thu Nov 29, 2018 5:49 pm
by Spunkster
You may want to use a different wideband. We recommend using the PSX Devices widebands.

Re: Innovate LC1 wideband setup

Posted: Sat Dec 08, 2018 4:58 pm
by AREA876
I'm still thinking there is something wrong with the LC1 conversion, using the LC1 conversion this is the result
Notice AN3 is way off from the LC1 reading and the AF is still not matching with AN3
Innovate LC1 Conversion.png
Innovate LC1 Conversion.png (171.84 KiB) Viewed 5982 times

Re: Innovate LC1 wideband setup

Posted: Sat Dec 08, 2018 5:02 pm
by AREA876
Now when I use a custom conversion this well give a perfect match between AN3 and the LC1 reading but the AF still doesn't match
So my belief is the LC1 conversion is not correct.
I'm trying to figure out if it's my ECU or Kpro that has a problem that's why the AF and the AN3 are NOT matching
Custom Conversion.png
Custom Conversion.png (171.45 KiB) Viewed 5982 times

Re: Innovate LC1 wideband setup

Posted: Sat Dec 21, 2019 1:40 pm
by AREA876
Problem solved, the issue was my input wasn't set correctly. My wideband was connected to analog 3 while my wideband input was set to 0 which was my coolant pressure sensor. It's now set to analog 3 and everything is working fine
Wideband Analog Input.png
Wideband Analog Input.png (172.72 KiB) Viewed 4821 times