Methanol Map Desperate

K-Series Programmable ECU installation questions / support issues
Post Reply
ajburns28
Posts: 1
Joined: Mon Jan 14, 2019 9:49 pm

Methanol Map Desperate

Post by ajburns28 »

Hello my name is AJ Burns and I race with the Powri midget series which is an open wheel dirt track racing series that use high performance 4 cylinder engines. We were one of the first teams to make the switch to the K series engine and we are are trying to race this Friday
honda 1.jpeg
honda 1.jpeg (370.78 KiB) Viewed 746 times
. We are just getting our Kpro hooked up but we are at a total loss on mapping. We are running 100% methanol, no transmission(direct drive, 1 gear), and no starter or fans. All of skunk2's best internals, intake, and throttle body with 90mm pistons. We are just trying to get a very conservative baseline map for this weekend. Essentially enough to run and fire. We can get it on a chassis dyno in a couple weeks but no time before this weekend. If anyone can help me please contact me on here, or call or text (951)902-9716. Just a broke racer trying to get to the races!
Attachments
image2 (5).jpeg
image2 (5).jpeg (975.91 KiB) Viewed 746 times
humbolt.png
humbolt.png (1.43 MiB) Viewed 746 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Methanol Map Desperate

Post by Spunkster »

This needs to be tuned on the dyno before even thinking about trying to race it. Untuned you will more than likely damage the engine.
Post Reply