Issues with kmanager options

K-Series Programmable ECU installation questions / support issues
Post Reply
muffpunter
Posts: 5
Joined: Sat Oct 05, 2019 8:44 pm

Issues with kmanager options

Post by muffpunter »

I'm new to the forum, and have a few questions. I just finished a 92 integra gsr with a k20/k24 swap, rsx type s engine harness, type s ecu with kpro v4. For whatever reason, it seems disabling the multiplexer, ELD, and secondary o2 sensor options seem to have no effect. I still get codes P1298, P0600, P0141 (Keep in mind, the 92 integras do NOT have ELD). I just got the exhaust bolted up today and attempted to drive the car but it runs horribly. Another issue is that the map sensor may be bad as the readings were not changing on the kpro app. I will be replacing the map tomorrow though.

While researching, I saw people mentioning "disabling OBDII" or "enable emissions error checking" options but that may have been on an outdated version

any insight would be appreciated
Attachments
Screenshot_20191005-184303_Hondata.jpg
Screenshot_20191005-184303_Hondata.jpg (1.01 MiB) Viewed 1131 times
Capture2.PNG
Capture2.PNG (42.03 KiB) Viewed 1131 times
Capture.PNG
Capture.PNG (54.87 KiB) Viewed 1131 times
muffpunter
Posts: 5
Joined: Sat Oct 05, 2019 8:44 pm

Re: Issues with kmanager options

Post by muffpunter »

Here's some more info...
Attachments
Capture3.PNG
Capture3.PNG (42.52 KiB) Viewed 1130 times
kprov41.kal
(163.13 KiB) Downloaded 76 times
muffpunter
Posts: 5
Joined: Sat Oct 05, 2019 8:44 pm

Re: Issues with kmanager options

Post by muffpunter »

ecu 37820-PRB-A03
Not sure why pic is upside down
Attachments
20191006_003404.jpg
20191006_003404.jpg (3 MiB) Viewed 1129 times
muffpunter
Posts: 5
Joined: Sat Oct 05, 2019 8:44 pm

Re: Issues with kmanager options

Post by muffpunter »

I replaced the MAP sensor today, but it didn't help with how bad the car is running. It seems like storing the calibration has no effect on the ecu, even though retrieving the calibration is identical to the one uploaded.
muffpunter
Posts: 5
Joined: Sat Oct 05, 2019 8:44 pm

Re: Issues with kmanager options

Post by muffpunter »

why do these errors keep coming up? I must be missing something here.
Attachments
Capture4.PNG
Capture4.PNG (75.04 KiB) Viewed 1116 times
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Issues with kmanager options

Post by Spunkster »

Have you uploaded the calibration to the ECU once you made the changes?
Post Reply