AEM 30-4110 wb with PNF tune and ecu

K-Series Programmable ECU installation questions / support issues
Post Reply
BongoBennie
Posts: 36
Joined: Fri Jun 18, 2004 12:40 pm
Location: vegas

AEM 30-4110 wb with PNF tune and ecu

Post by BongoBennie »

I'm running PNF ECU and tune, I want to run AEM 30-4110 as primary O2. I have all this installed already and now finding that PNF tunes do not allow external Wideband. I would think I could at worst start with a new tune from PRB file but will there be an issue with the PNF ECU?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AEM 30-4110 wb with PNF tune and ecu

Post by Spunkster »

You will have to use the PRB calibration and it will work in the PNF ECU.
BlueEp3
Posts: 1
Joined: Fri May 06, 2022 3:35 pm

Re: AEM 30-4110 wb with PNF tune and ecu

Post by BlueEp3 »

Where can I find a prb calibration though? Every calibration in the vault for the k20a3 are pnf. I have the aem Wideband and want to use it with my kpro.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AEM 30-4110 wb with PNF tune and ecu

Post by Spunkster »

Click on the New Calibration button at the top of the software.
Post Reply