ECU shutting down?
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
ECU shutting down?
Check out this log. At the upper rpm range, everything pretty much goes default. All grounds are good, using resistor type plugs. I know its running rich. Any ideas? thanks in advance
- Attachments
-
- donnie tps96.kdl
- (96.29 KiB) Downloaded 80 times
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
it is a 2006 type s. full-race turbo kit. pl4-rc1000s.
I was disabling sensors to try to narrow down the problem. for this particular log, they just werent enabled. on previous logs, no knock was detected and the speed sensor was working properly until this glitch or whatever it may be happened. Also Ive added grounds directly to the sensors such as the tps, map, vss, etc. to ensure they have proper grounds. And according to the logs, voltage isnt dropping.
I was disabling sensors to try to narrow down the problem. for this particular log, they just werent enabled. on previous logs, no knock was detected and the speed sensor was working properly until this glitch or whatever it may be happened. Also Ive added grounds directly to the sensors such as the tps, map, vss, etc. to ensure they have proper grounds. And according to the logs, voltage isnt dropping.
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
recalibrated tps. heres the log and kal
- Attachments
-
- rsx06 turbo.kal
- (53.72 KiB) Downloaded 118 times
-
- rsx06 7-30.kdl
- (55.6 KiB) Downloaded 80 times
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
-
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm