K-Series Programmable ECU Calibration updates / downloads
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Mon Aug 16, 2021 11:39 am
Bbert209 wrote: ↑ Sun Aug 15, 2021 9:03 am
And a p1259 code popped up
Double check your oil level and the connection to the Vtec pressure switch.
-Ed
Instagram: calibrated.tuning
Bbert209
Posts: 104 Joined: Wed Apr 21, 2021 2:04 am
Post
by Bbert209 » Mon Aug 16, 2021 1:05 pm
Your right it was the oil, though it was something else but all it wants is a fresh oil change, didn't realize it was already that time for it.
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Fri Aug 20, 2021 9:43 am
Load the new file and create a similar datalog. I am dialing in the fuel and removing timing in an area with knock.
-Ed
Attachments
Bbert209Rev15.kal
(145.17 KiB) Downloaded 80 times
Instagram: calibrated.tuning
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Sun Aug 29, 2021 6:42 pm
Added some timing to the VTC 10 table. I want to see if we can gain a bit of power before we move to the next table. The Air fuel ratios look good. Load the file and create a similar datalog.
-Ed
Attachments
Bbert209Rev16.kal
(145.79 KiB) Downloaded 81 times
Instagram: calibrated.tuning
Bbert209
Posts: 104 Joined: Wed Apr 21, 2021 2:04 am
Post
by Bbert209 » Sun Sep 12, 2021 8:52 am
Sorry for late post, works being a bastard again.
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Tue Sep 21, 2021 6:56 pm
Did some minor adjustments. I need a WOT pull before we move to the next table.
-Ed
Attachments
Bbert209Rev17.kal
(146.08 KiB) Downloaded 75 times
Instagram: calibrated.tuning
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Mon Oct 18, 2021 7:53 pm
Fuel looks good we are moving to VTC 20. Create a normal driving datalog.
-Ed
Attachments
Bbert209Rev18.kal
(143.99 KiB) Downloaded 63 times
Instagram: calibrated.tuning
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Wed Oct 20, 2021 8:05 pm
Cleaned up some fuel and added more timing at the top. Create a normal drive datalog with at least 2 WOT pulls in 3rd gear.
-Ed
Attachments
Bbert209Rev19.kal
(143.94 KiB) Downloaded 66 times
Instagram: calibrated.tuning
CalibratEd
Posts: 1465 Joined: Fri Feb 07, 2020 3:20 pm
Contact:
Post
by CalibratEd » Sun Oct 24, 2021 7:57 pm
Moving to VTC 30 create normal driving data log with 1 WOT pull in 3rd gear.
-Ed
Attachments
Bbert209Rev20.kal
(144.36 KiB) Downloaded 69 times
Instagram: calibrated.tuning