K20a Toda A3 Cams Base Map Needed Please

K-Series Programmable ECU Calibration updates / downloads
D@nCeR
Posts: 11
Joined: Tue Jun 30, 2009 3:53 am

Post by D@nCeR » Tue Sep 22, 2009 8:12 am

another side note is that i dont have access to a dyno.. so this is gonna have to be street mapped as much as possible..

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 » Tue Sep 22, 2009 8:56 am

Sorry man.

D@nCeR
Posts: 11
Joined: Tue Jun 30, 2009 3:53 am

Post by D@nCeR » Tue Sep 22, 2009 10:21 am

keto06 wrote:Sorry man.
For what mate?

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 » Tue Sep 22, 2009 12:42 pm

That I couldnt be more of help. I think if you do 1 datalog and put lean protection on, you probably can do 1 datalog with no worries....

rikitaun
Posts: 93
Joined: Wed Mar 08, 2006 12:46 pm
Location: Spain

Re: K20a Toda A3 Cams Base Map Needed Please

Post by rikitaun » Thu Sep 24, 2009 12:46 pm

D@nCeR wrote:Hey Guys


Mods List:

Gruppe M
Hondata KPRO
Toda A3 Camshafts
Toda 4-2-1 Manifold
RBC Inlet Manifold
Standard Injectors
see the duty cicle on your logs.... with this mods and standard injector, wrong ... more of 80%

I have the same mods and need 440cc injectors ;)

What is your Kpro ?? PRA or PRb ??

Open standard kal of kamanger (pra or prb) dynotuned and ajust VTC degrees:

Low cam. 40º from 2500 to end

highcam.
3000-5250 50º
5500-5800 45º
6000-7000 40º
7400 35º
7700-8000 30º
8500 27º
8800- final 25º

rev.limit 8800rpm

Locked