Very new, first from ISRAEL need MAP for K24+K20A2 (12.5:1)

K-Series Programmable ECU Calibration updates / downloads
Post Reply
u_tal
Posts: 6
Joined: Fri Jan 15, 2010 6:46 pm

Very new, first from ISRAEL need MAP for K24+K20A2 (12.5:1)

Post by u_tal » Sat Jan 23, 2010 12:25 am

Hello guys! I'm the first to have hondata in Israel! i can see that there is alot of experience guys here...
my project is: K24 block with K20A2 head and 12.5:1 cp pistons, good header and stock K24 intake manifold.
Looking for good map with the application above to start with.
Thank you for all the help!
Udi

u_tal
Posts: 6
Joined: Fri Jan 15, 2010 6:46 pm

Post by u_tal » Sat Jan 30, 2010 12:51 pm

I'm sure that somebody here did it before....

Slip_Angle
Posts: 78
Joined: Wed Apr 11, 2007 8:26 pm

Post by Slip_Angle » Sat Jan 30, 2010 1:00 pm

Here's my k24a2 calibration. You can try it and tune from there...
Attachments
20091203a.kal
(48.48 KiB) Downloaded 205 times

u_tal
Posts: 6
Joined: Fri Jan 15, 2010 6:46 pm

Post by u_tal » Sun Jan 31, 2010 12:27 am

Thank you Man! i knew there is someone here :wink:
What is your setup?
Udi
Slip_Angle wrote:Here's my k24a2 calibration. You can try it and tune from there...

Post Reply