Need Help On Rotrex Kal
Need Help On Rotrex Kal
My friend and I installed a Rotrex C30-94 on my 02 RSX-S a few weeks ago and have been trying to do a pull but, lean cut keeps activating and we keep add some fuel and back off timing but, lean cut keeps occuring. Any advice would be much appreciated here is my list of mods and the current kal and the best datalog we could do. The Kal is a base map of the JSRC 550cc 9lb.
Mod: Competition Clutch Stage 4, ACT Prolite flywheel, ESMM Inserts, Ingalls ETD, Skunk2 Rear Camber Kit, Neuspeed Race Springs, RC550cc, Greddy Evo2 Exhaust, BuddyClub Race Headers, and Kpro of course.
Mod: Competition Clutch Stage 4, ACT Prolite flywheel, ESMM Inserts, Ingalls ETD, Skunk2 Rear Camber Kit, Neuspeed Race Springs, RC550cc, Greddy Evo2 Exhaust, BuddyClub Race Headers, and Kpro of course.
- Attachments
-
- Rotrex C30-94 550cc.kal
- Kal
- (52.45 KiB) Downloaded 218 times
-
- second run on first st..kdl
- Datalog
- (61.19 KiB) Downloaded 281 times
are you running a stock fuel pump? if the answer is yes , get a walbro in your tank asap. your asking for trouble.
here try this on your car , do a datalog
here try this on your car , do a datalog
- Attachments
-
- Rotrex C30-94 550cc(cranny).kal
- (52.67 KiB) Downloaded 286 times
Yes, I am running a stock fuel pump and I'll get a walbro asap which for me will be in three weeks. I drive it nicely ALL the time and rarely do pulls for datalogs. Anyways, I have tried that map from you cranny and I don't receive that many knocks(which is great) however I can feel the motor just shuttering around the vtec rpm area. I'll post the datalog as soon as my friend emails it to me it's on his laptop. BTW I appreciate your help
- Attachments
-
- sthur road.kdl
- (21.49 KiB) Downloaded 280 times
another roll on the throttle guy. listen , you cant roll on the throttle. that datalog you posted is useless. and like 7 seconds long. go for a 20 minute drive in open loop , vary driving conditions , try and use the whole map. somewhere in that 20 minute datalog , get the car in 3rd gear at 2k rpm , instantly floor it , dont roll on the dam throttle , and hold it till redline or you hear or see something unhealthy.
load this map on to do it:
load this map on to do it:
- Attachments
-
- Rotrex C30-94 550cc(cranny).kal
- (48.72 KiB) Downloaded 227 times
well heres what to load on once youve installed your map sensor
- Attachments
-
- Rotrex C30-94 550cc(cranny).kal
- (48.72 KiB) Downloaded 201 times
cant see it no. its probably something to do with you crossing into vtec at 20% throttle.
here i updated this again:
here i updated this again:
- Attachments
-
- Rotrex C30-94 550cc(cranny).kal
- (48.72 KiB) Downloaded 266 times
here i made a few changes again , you have to always relay to me how the car feels each time ok. from your datalog it looks like its running alot better already. no knock anymore.
- Attachments
-
- Rotrex C30-94 550cc(cranny).kal
- (54.47 KiB) Downloaded 255 times