Hondata

Hondata User Forum
It is currently Fri May 24, 2013 7:44 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: 06 TSX Calibration
PostPosted: Tue Apr 06, 2010 3:14 pm 
Offline

Joined: Wed Apr 11, 2007 8:26 pm
Posts: 68
Is there a calibration for the 06+ K24a2? Even direction on what cam angles the 06 K24a2 likes for closed and open loop would be a great start.

I just installed the 06 Intake cam on my 04 K24a2 and A/F is all over the place now. I didn't think a cam would make things so different but I don't want to tune A/F not knowing what good cam angles are for closed loop.

Thanks!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 26, 2010 4:59 am 
Offline

Joined: Mon Apr 14, 2008 5:14 pm
Posts: 41
Hey slip angle,

Do you have a new map for the 06 tsx intake cam? I am about to switch to the same intake cam on my k24a2. I am running your old map (adjusted for A/F of course) you uploaded and its by far the best map I've used.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 27, 2010 9:30 pm 
Offline

Joined: Fri Jul 17, 2009 9:29 pm
Posts: 351
I tuned 1 06 k24a2 but it was in an RSX and had the stock gears unmodified...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 27, 2010 9:54 pm 
Offline

Joined: Wed Apr 11, 2007 8:26 pm
Posts: 68
tiger wrote:
Hey slip angle,

Do you have a new map for the 06 tsx intake cam? I am about to switch to the same intake cam on my k24a2. I am running your old map (adjusted for A/F of course) you uploaded and its by far the best map I've used.


Sure, no problem. It's not complete yet because my O2 sensor went on me and I'm still doing a bit of work on cam angles but give it a try..


Attachments:
2010-04-13c.kal [48.41 KiB]
Downloaded 151 times
Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 30, 2010 5:31 am 
Offline

Joined: Mon Apr 14, 2008 5:14 pm
Posts: 41
Slip_Angle wrote:
Sure, no problem. It's not complete yet because my O2 sensor went on me and I'm still doing a bit of work on cam angles but give it a try..


Awesome thanks man. Keep me posted on how your map develops. I try tuning things like cam angles and usually just make a mess of things.

keto06 wrote:
I tuned 1 06 k24a2 but it was in an RSX and had the stock gears unmodified...


I will have the 50* VTC on the 06 Intake Cam.


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 01, 2010 9:59 pm 
Offline

Joined: Thu Mar 11, 2010 9:36 am
Posts: 3
keto06 wrote:
I tuned 1 06 k24a2 but it was in an RSX and had the stock gears unmodified...


I did a search but thought this may be faster if i just ask. would you happen to have a copy of this cal. ? as i have a k24a2 in a rsx base with stock gears and rbc/type s TB Injen cold air and header into a greddy cat back sys. But i have no cat on car (bought used so not sure on header as it came on the car could be a megan? (4x2x1)
Thanks for your time i just got the car running and have to get it to drive straight before i can do any kind of pulls :) (hope this week get it in for alignment)


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 19, 2010 7:02 am 
Offline

Joined: Mon Apr 14, 2008 5:14 pm
Posts: 41
Hey Slip Angle,

Just wondering if you've had a chance to finish your map?


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 22, 2010 6:43 am 
Offline

Joined: Wed Apr 11, 2007 8:26 pm
Posts: 68
tiger wrote:
Hey Slip Angle,

Just wondering if you've had a chance to finish your map?


Sure, I've attached the latest version. I changed cruise to 25* VTC and modified some of the open loop angles. Fine tuned ignition for any knocking and added 10* IGN retard at 130 degrees IAT.

Let me know how it works for your car.


Attachments:
2010-05-21a.kal [47.44 KiB]
Downloaded 215 times
Top
 Profile  
 
 Post subject:
PostPosted: Mon May 24, 2010 5:44 am 
Offline

Joined: Mon Apr 14, 2008 5:14 pm
Posts: 41
Slip_Angle wrote:
tiger wrote:
Hey Slip Angle,

Just wondering if you've had a chance to finish your map?


Sure, I've attached the latest version. I changed cruise to 25* VTC and modified some of the open loop angles. Fine tuned ignition for any knocking and added 10* IGN retard at 130 degrees IAT.

Let me know how it works for your car.


Great, I will do some tests tonight. I used the one you previously posted and it worked great. Once it moved onto the high cam map, it really pulled. I just wished it didn't have to stay on the low cam for so long. I actually let an instructor at a autox school drive my car and he said the acceleration was nuts so yeah, the map was working great.


Top
 Profile  
 
 Post subject: Nice
PostPosted: Thu Jul 22, 2010 8:59 pm 
Offline

Joined: Thu Jul 22, 2010 8:43 pm
Posts: 10
How is this map working out?

_________________
HONDATA FTW


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 01, 2010 9:41 am 
Offline

Joined: Mon Apr 14, 2008 5:14 pm
Posts: 41
Sorry I don't get updates for this thread. The map really worked well. I don't use it anymore as I am boosted now.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group