Stock 06' K24a2 in a 02 RSX - What Calibration File?

K-Series Programmable ECU Calibration updates / downloads
Post Reply
Chillinit
Posts: 4
Joined: Tue Jun 22, 2010 5:21 am
Location: Toronto

Stock 06' K24a2 in a 02 RSX - What Calibration File?

Post by Chillinit » Tue Jun 22, 2010 11:04 am

Hello Everyone,

Great forum, very informative.

What calibration file should I upload once the swap is complete. I'm just getting familiar with the K-Pro.

Here is the file that I think would work. Can someone please verify this?

Under "New Calibration", "Other Vehicles",

K24-tsx-stock.kal

User avatar
Spunkster
Site Admin
Posts: 17683
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Jun 22, 2010 11:10 am

That should be a good starting point.

Chillinit
Posts: 4
Joined: Tue Jun 22, 2010 5:21 am
Location: Toronto

Post by Chillinit » Wed Jun 23, 2010 10:01 am

Will this file be ok with an 06-08 k24a2 though? I was thinking it was 04-05 specific.

Slip_Angle
Posts: 78
Joined: Wed Apr 11, 2007 8:26 pm

Post by Slip_Angle » Wed Jun 23, 2010 8:51 pm

There are 3 TSX calibrations for N/A engines but they are all 04-05. Hondata really should provide a stock 06 TSX calibration because the intake cam is so much better and requires much different cam angles.

I would think Hondata already has this calibration as they must be providing something with the TSX kpro for 06 models.

You can find mine posted in these forums but it's on a modified engine. I think it's pretty reasonable that Hondata provide the 06 K24a2 stock calibration but for some reason there is nothing to be found.

Hondata?

Chillinit
Posts: 4
Joined: Tue Jun 22, 2010 5:21 am
Location: Toronto

Post by Chillinit » Fri Jun 25, 2010 12:27 pm

Thanks for the post Slip. Anyone here have a calibration file that is geared more towards an 06-08 k24a2?

Chillinit
Posts: 4
Joined: Tue Jun 22, 2010 5:21 am
Location: Toronto

Post by Chillinit » Mon Jul 05, 2010 5:01 am

Update:

I've completed the swap and uploaded the "K24-tsx-stock.kal".

Everything seems to be running fine. I haven't done any WOT runs though however part throttle a/f's look to be pretty safe @ 14.7 on average. Time to get my exhaust installed and tune.

Post Reply