Page 1 of 1

Stock 06' K24a2 in a 02 RSX - What Calibration File?

Posted: Tue Jun 22, 2010 11:04 am
by Chillinit
Hello Everyone,

Great forum, very informative.

What calibration file should I upload once the swap is complete. I'm just getting familiar with the K-Pro.

Here is the file that I think would work. Can someone please verify this?

Under "New Calibration", "Other Vehicles",

K24-tsx-stock.kal

Posted: Tue Jun 22, 2010 11:10 am
by Spunkster
That should be a good starting point.

Posted: Wed Jun 23, 2010 10:01 am
by Chillinit
Will this file be ok with an 06-08 k24a2 though? I was thinking it was 04-05 specific.

Posted: Wed Jun 23, 2010 8:51 pm
by Slip_Angle
There are 3 TSX calibrations for N/A engines but they are all 04-05. Hondata really should provide a stock 06 TSX calibration because the intake cam is so much better and requires much different cam angles.

I would think Hondata already has this calibration as they must be providing something with the TSX kpro for 06 models.

You can find mine posted in these forums but it's on a modified engine. I think it's pretty reasonable that Hondata provide the 06 K24a2 stock calibration but for some reason there is nothing to be found.

Hondata?

Posted: Fri Jun 25, 2010 12:27 pm
by Chillinit
Thanks for the post Slip. Anyone here have a calibration file that is geared more towards an 06-08 k24a2?

Posted: Mon Jul 05, 2010 5:01 am
by Chillinit
Update:

I've completed the swap and uploaded the "K24-tsx-stock.kal".

Everything seems to be running fine. I haven't done any WOT runs though however part throttle a/f's look to be pretty safe @ 14.7 on average. Time to get my exhaust installed and tune.