I need a tuned map for a stock Euro EP3 K20A2. Help please

K-Series Programmable ECU Calibration updates / downloads
windspot
Posts: 24
Joined: Wed Feb 13, 2013 12:40 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by windspot »

maybe you come for holidays ;-)

windspot
Posts: 24
Joined: Wed Feb 13, 2013 12:40 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by windspot »

Nazul wrote:Here u go this calibration is adapted for closed loop all sensors on and no fuel trim
nazul can you modify the settings for stock intake?

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by Nazul »

It should be ok for that already, u have issues with it?

windspot
Posts: 24
Joined: Wed Feb 13, 2013 12:40 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by windspot »

Nazul wrote:It should be ok for that already, u have issues with it?
its ok i think i feel that i lose some power but i dont care i dont like the noise from the cai

how can i make a datalog so you can check it and tell me?

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by Nazul »

You should check the manual, there u can get the info.

keithtyper
Posts: 10
Joined: Sat Apr 27, 2013 6:58 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by keithtyper »

trying this map at the moment noticed ecu light flashes sometimes i take it this is the knock sensor is it safe to run if its knocking ep3 k20a2 here

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by Nazul »

No ofcourse not, knocks are not safe.

keithtyper
Posts: 10
Joined: Sat Apr 27, 2013 6:58 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by keithtyper »

ok thanks for the info any ideas why it might be knocking

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by Nazul »

Because your car is different in setup.

keithtyper
Posts: 10
Joined: Sat Apr 27, 2013 6:58 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by keithtyper »

ah ok np getting it mapped right in next week

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by Nazul »

Thats the right way :)

seanyreeves
Posts: 10
Joined: Thu Nov 10, 2011 3:44 pm

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by seanyreeves »

car was swapped yes, but ran this map on an ep3 that belonged to a mate for months. no problems at all with the sensors switched off. theyre all pretty useless sensors.

seanyreeves
Posts: 10
Joined: Thu Nov 10, 2011 3:44 pm

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by seanyreeves »

and yes it was whp, it made 240 at the fly. a stock ep3 gearbox loses you around 12% power at the wheels.

kristanbbr110
Posts: 2
Joined: Sat Feb 08, 2014 3:50 pm

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by kristanbbr110 »

Hi guys, im going to be buying a kpro next week, i got k20a2 ep3, k&n typhoon with a 4-2-1manifold with a straight through exhaust, will this map be any good ? i want all the o2 sensors disabled and immobiliser.
Kristan.

curtusz
Posts: 203
Joined: Sat Jun 01, 2013 10:14 am
Location: Wakefield/Leeds uk

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

Post by curtusz »

I tried this map got some knocks .... best things to do is retard ignition where knock occurs ... eventually you wont have any ... make sure u got a a/f gauge .... but sure try it

Post Reply