Need a safe map for k20a2 i/h/e/rbc

K-Series Programmable ECU Calibration updates / downloads
Post Reply
d_lo77
Posts: 5
Joined: Fri May 03, 2013 11:42 pm

Need a safe map for k20a2 i/h/e/rbc

Post by d_lo77 » Fri May 03, 2013 11:45 pm

mods are short ram intake, dcrh, 2.5" exhaust, rbc manifold with img, type r flywheel

Thanks

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: Need a safe map for k20a2 i/h/e/rbc

Post by keto06 » Sun May 05, 2013 1:15 am

post a log
Attachments
johnny6edit.kal
(155.45 KiB) Downloaded 323 times
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: Need a safe map for k20a2 i/h/e/rbc

Post by Nazul » Sun May 05, 2013 7:12 am

Why do u lower the cam angles so fast in vtec keto?
In my tune it stays 50° for a longer time and the lowest is 35°

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: Need a safe map for k20a2 i/h/e/rbc

Post by keto06 » Sun May 05, 2013 11:51 am

Your map is tuned so thats why I didnt say anything but usually I dont like to do maps with high cam angles that late in the RPM band. He also has a smaller header, a short ram intake and a smaller exhaust.

Generally z1/ITR cams will make the cam angles stay high in the midrange longer, but Ive found with a short ram, RBC and a2 cams, it doesnt like to hold the 50 cam too long. Plus since this car is not on a dyno, its best to leave it conservative.

http://hondata.com/techk-protraining.html
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

Nazul
Posts: 137
Joined: Mon Sep 24, 2012 8:15 am

Re: Need a safe map for k20a2 i/h/e/rbc

Post by Nazul » Mon May 06, 2013 7:22 am

Ok the better it breaths the longer u can set the angles high right?
This is why mine is tuned this way, thanks for the explanation!

d_lo77
Posts: 5
Joined: Fri May 03, 2013 11:42 pm

Re: Need a safe map for k20a2 i/h/e/rbc

Post by d_lo77 » Mon May 06, 2013 10:08 am

keto06 wrote:post a log
Thanks will do

Post Reply