mods are short ram intake, dcrh, 2.5" exhaust, rbc manifold with img, type r flywheel
Thanks
Need a safe map for k20a2 i/h/e/rbc
Re: Need a safe map for k20a2 i/h/e/rbc
post a log
- Attachments
-
- johnny6edit.kal
- (155.45 KiB) Downloaded 436 times
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: Need a safe map for k20a2 i/h/e/rbc
Why do u lower the cam angles so fast in vtec keto?
In my tune it stays 50° for a longer time and the lowest is 35°
In my tune it stays 50° for a longer time and the lowest is 35°
Re: Need a safe map for k20a2 i/h/e/rbc
Your map is tuned so thats why I didnt say anything but usually I dont like to do maps with high cam angles that late in the RPM band. He also has a smaller header, a short ram intake and a smaller exhaust.
Generally z1/ITR cams will make the cam angles stay high in the midrange longer, but Ive found with a short ram, RBC and a2 cams, it doesnt like to hold the 50 cam too long. Plus since this car is not on a dyno, its best to leave it conservative.
http://hondata.com/techk-protraining.html
Generally z1/ITR cams will make the cam angles stay high in the midrange longer, but Ive found with a short ram, RBC and a2 cams, it doesnt like to hold the 50 cam too long. Plus since this car is not on a dyno, its best to leave it conservative.
http://hondata.com/techk-protraining.html
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: Need a safe map for k20a2 i/h/e/rbc
Ok the better it breaths the longer u can set the angles high right?
This is why mine is tuned this way, thanks for the explanation!
This is why mine is tuned this way, thanks for the explanation!
Re: Need a safe map for k20a2 i/h/e/rbc
Thanks will doketo06 wrote:post a log