can someone help me with a base map. cai/e/rh/rbc/hondata im

K-Series Programmable ECU Calibration updates / downloads
Post Reply
rsxballer
Posts: 2
Joined: Wed May 14, 2014 8:50 am

can someone help me with a base map. cai/e/rh/rbc/hondata im

Post by rsxballer » Wed May 14, 2014 8:58 am

I have a stock 02 rsx type s with megan racing headers,megan 2.5" catback, rbc intake manifold with themal gaskt, tb thermal gasket, aem v2 cai. Can someone please help me with a map to use until I can hit the dyno. Thanks in advance

1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Re: can someone help me with a base map. cai/e/rh/rbc/hondat

Post by 1320k24EK » Wed May 14, 2014 3:15 pm

Here is one that is supplied from Hondata. It should be more than good enough for your setup until you get it tuned!
Attachments
k20a2.kal
(150.12 KiB) Downloaded 147 times

curtusz
Posts: 203
Joined: Sat Jun 01, 2013 10:14 am
Location: Wakefield/Leeds uk

Re: can someone help me with a base map. cai/e/rh/rbc/hondat

Post by curtusz » Wed May 21, 2014 4:18 pm

running rbc on basemap aint wise could be too lean wouldn't go hitting wot with that

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: can someone help me with a base map. cai/e/rh/rbc/hondat

Post by keto06 » Sat May 24, 2014 1:35 pm

http://www.hondata.com/forum/download/file.php?id=2887

Use that one. Its a good staring place.
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

Post Reply