K20a2-Injen CAI, PRC, PLM Header, catback full titanium 64mm

K-Series Programmable ECU Calibration updates / downloads
Post Reply
maxep3
Posts: 12
Joined: Thu Dec 30, 2010 2:29 pm

K20a2-Injen CAI, PRC, PLM Header, catback full titanium 64mm

Post by maxep3 » Tue May 20, 2014 3:58 pm

Need cal for K20a2 European with the mods on title please. I also have throttle 65mm, flywheels FIDANZA, clutch stage 4, lsd JDM and final drive 5,086...

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: K20a2-Injen CAI, PRC, PLM Header, catback full titanium

Post by keto06 » Sat May 24, 2014 1:31 pm

Use the Euro Type R with ITR Cams/Hdr/etc as your base cal and then tune from there.

They give some good instruction in the notes.

I will say you will likely have to put in work on the low cam.

If you need some help, download that kal and upload it to your car. Go for a drive including a couple solid 3rd gear pulls and post your log up to this thread along with any changes you made to the kal.

-Keto
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: K20a2-Injen CAI, PRC, PLM Header, catback full titanium

Post by tkane4389 » Sun May 25, 2014 6:46 am

I hit him up about tuning it for him. I'll be working with him a little bit in the next few days. I looked on the page and almost every response is from one of us lol

Post Reply